Printers - Appuals Tech from the Experts Sun, 24 Mar 2024 04:24:14 +0000 en-US hourly 1 https://wordpress.org/?v=6.4.4 The 5 Best 3D Printers for Beginners in 2024 [All Budgets] https://appuals.com/best-3d-printer-for-beginners/?utm_source=rss&utm_medium=rss&utm_campaign=best-3d-printer-for-beginners https://appuals.com/best-3d-printer-for-beginners/#respond Sun, 24 Mar 2024 04:24:12 +0000 https://appuals.com/?p=409563 Getting started with 3D printing can be exciting and a little overwhelming. But now, this technology is right at our fingertips, turning digital plans into real objects. In 2024, there are plenty of 3D printers made just for beginners. In this guide, we will look at the “5 Best 3D Printers for Beginners in 2024.” …

The post The 5 Best 3D Printers for Beginners in 2024 [All Budgets] appeared first on Appuals.

]]>
Getting started with 3D printing can be exciting and a little overwhelming. But now, this technology is right at our fingertips, turning digital plans into real objects. In 2024, there are plenty of 3D printers made just for beginners.

In this guide, we will look at the “5 Best 3D Printers for Beginners in 2024.” These printers are easy to use and can grow with you as you learn. Whether you want a small, affordable one or something bigger, each printer we talk about here is simple, good quality, and can do more as you get better.

Whether you’re an educator, an entrepreneur prototyping new ideas, or a hobbyist exploring creative boundaries, this guide offers honest recommendations that lay a strong foundation for your 3D printing endeavors. But first, let’s discuss what makes a 3D printer the best.

What Makes A 3D Printer The Best?

Determining what makes a 3D printer the best involves considering various factors that cater to different needs and applications. Here’s a detailed breakdown of the aspects to consider:

  • Print Quality: When considering a printer, prioritize the quality of the prints above all else. Seek out a printer capable of delivering clean, detailed, and accurate prints, as these are essential characteristics for any printing task. Several factors influence print quality, including resolution, which is typically measured in microns; a lower micron count corresponds to a higher resolution output.

    Additionally, layer height plays a crucial role, with smaller layers yielding finer details in the final print. While faster print speeds may shorten printing durations, it’s important to note that they can potentially impact print quality, so it’s essential to strike a balance between speed and quality when selecting a printer.
  • Build Volume: The build volume determines the maximum size of the objects you can print. Consider what you plan to print and choose a printer with a build volume that fits those dimensions.
  • Reliability and Durability: A good 3D printer should consistently produce quality prints and withstand the test of time. Look for printers with good build quality and reliable components.
  • Ease of Use: For beginners and those seeking hassle-free printing, prioritize ease of use. Look for features such as a user-friendly interface, which can be facilitated by touchscreens or intuitive software. Automatic bed leveling minimizes the need for manual calibration, streamlining the printing process. Additionally, filament sensors are valuable for alerting users when filament levels are low or if any issues arise during printing.
  • Material Compatibility: Different projects require different materials. The best 3D printers can handle a variety of filaments, such as PLA, ABS, PETG, and specialty materials like flexible or composite filaments.
  • Connectivity: Options for connecting to your printer can include USB, SD card, Wi-Fi, or Ethernet. Some printers also offer remote monitoring and control through apps.
  • Software: The software that comes with the printer, or that the printer is compatible with, should be capable of translating your designs into printable files with ease. Look for slicer software that offers a good balance between user-friendliness and advanced features.
  • Safety Features: Safety features are crucial, particularly in environments such as educational settings or around children. Prioritize printers with enclosed build areas, as they help regulate temperature and minimize the risk of accidental burns.

    Additionally, look for printers equipped with HEPA filters, which can effectively reduce the emission of potentially harmful particles, enhancing safety during operation.
  • Support and Community: A strong user community and good customer support can be invaluable, especially for troubleshooting and when you’re learning to use your printer.
  • Price: Finally, the cost is a significant factor. The best printer for you balances all the above factors with how much you’re willing or able to spend.

When choosing the best 3D printer, it’s important to weigh these factors against your specific needs and preferences. Whether you’re a hobbyist, educator, or professional, the “best” 3D printer is the one that fits your particular use case and budget.

READ MORE: 5 Best Furniture Design Software ➜

Best 3D Printers for Beginners

Here, we have intricately curated a list of the best 3d printers for beginners. So, let’s get started.

1. Creality Ender 3 V2 Neo

Best Value

Pros

  • Auto-Leveling
  • Improved Extruder System
  • Removable Build Plate
  • Print Resume Feature

Cons

  • No Touchscreen
  • Print Speed Limitations
  • No Double Z-Axis
  • Bare-Bones Appearance

The Creality Ender 3 V2 Neo is a 3D printer that embodies a perfect blend of accessibility and precision, crafted to make 3D printing accessible to all without compromising on quality. It stands as a testament to Creality‘s commitment to innovation, featuring a CR Touch auto-leveling system that guarantees flawless layering. The printer boasts a PC steel printing platform, providing strong adhesion and a smooth foundation for creations.

On top of that, its all-metal Bowden extruder ensures durability and consistent performance, catering to both beginners and seasoned enthusiasts alike. This upgraded version of the classic Ender 3 V2 model is designed with user experience and print quality in mind. Notably, it arrives 95% pre-installed, simplifying setup for users.

Creality Ender 3 V2 Neo

The inclusion of the CR Touch auto-leveling kit significantly enhances leveling accuracy, while the PC steel printing platform and all-metal Bowden extruder further contribute to its reliability and durability.

↪ Pros

  • Auto-Leveling: The CR Touch auto-leveling feature works excellently, making it easier for beginners to start printing without manual leveling hassles.
  • Improved Extruder System: The new and improved metal extruder system enhances the printer’s performance and longevity.
  • Removable Build Plate: The build plate is designed to be removable, which makes removing prints easier and prevents damage from prints sticking too well.
  • Print Resume Feature: In case of power outages, the print resume feature saves progress and allows printing to continue once power is restored.

↪ Cons

  • No Touchscreen: Despite its advancements, the Ender 3 V2 Neo still lacks a touchscreen interface, which could have improved the user experience.
  • Print Speed Limitations: At higher speeds (around 120mm/s), there is a noticeable loss in print quality, suggesting that the printer is optimized for moderate speeds.
  • No Double Z-Axis: The printer does not feature a double Z-axis, which can be a drawback for those looking for higher stability and precision in their prints.
  • Bare-Bones Appearance: Some users might find the appearance of the Ender 3 V2 Neo to be quite basic, lacking the aesthetic appeal of some other models.

This printer is a part of Creality’s efforts to make 3D printing more accessible and user-friendly, while also incorporating features that cater to the needs of more experienced users. It strikes a balance between ease of use and performance, making it a suitable option for a wide range of 3D printing enthusiasts.

2. Original Prusa i3 MK3S+

Best Overall

Pros

  • High-Quality Prints
  • User-Friendly Software
  • Good Support Resources
  • Included PLA Spool

Cons

  • Build Volume
  • No Built-In 3D Scanner
  • Dated Interface
  • Price

205 Reviews

The Original Prusa i3 MK3S+ is a result of continuous innovation, embodying years of meticulous refinement to offer exceptional print quality and reliability in the realm of 3D printing. One of its standout features is the SuperPINDA probe, which ensures precise calibration of the first layer, setting the stage for flawless prints every time. Its advanced extruder is designed to handle filament with utmost smoothness and can seamlessly adapt to various filament types, making printing hassle-free.

More than just a tool, this printer unlocks a world of precision and endless possibilities, built upon Prusa’s longstanding commitment to excellence. As an evolution from the MK3S, the MK3S+ introduces improvements while maintaining the esteemed reputation of the Prusa i3 series.

Original Prusa i3 MK3S+

Moreover, the built-in filament sensor ensures the detection of any filament type or color, further augmenting its functionality. Retaining its direct drive system, the MK3S+ remains particularly advantageous for printing flexible materials, making it versatile for a wide range of printing needs.

↪ Pros

  • High-Quality Prints: The MK3S+ consistently produces high-quality prints without misprints, which is a testament to its reliability.
  • User-Friendly Software: The printer comes with easy-to-use yet powerful software that supports multiple filament types.
  • Good Support Resources: Prusa provides a professionally printed user guide and excellent support resources for the MK3S+.
  • Included PLA Spool: The MK3S+ includes a 1-kilogram PLA spool, which is a nice bonus for those starting out.

↪ Cons

  • Build Volume: The build volume might be a bit small for the price, which could be a limitation for larger projects.
  • No Built-In 3D Scanner: Unlike some other models, the MK3S+ does not feature a built-in 3D scanner.
  • Dated Interface: The LCD screen and interface are considered dated compared to more modern 3D printers.
  • Price: While the MK3S+ is a solid printer, some users feel that it may not be worth the price given the competition in the market.

The Original Prusa i3 MK3S+ continues to be a favorite in the 3D printing community for its consistent performance and the company’s commitment to open-source development. It’s a machine that balances ease of use with advanced features for enthusiasts and professionals alike.

READ MORE: SKP File Extension — What is it & How to Open it? ➜

3. Bambu Lab P1P

Best Speed

Pros

  • Blazing Speed
  • Simple Auto Bed Leveling
  • DIY Custom Side Panels
  • Optional Multicolor Capabilities

Cons

  • Appearance
  • Noise Level
  • Proprietary Parts
  • Filament Wastage

The Bambu Lab P1P is a high-speed performer in the world of 3D printing, designed with a robust CoreXY framework tailored to deliver swift printing results. From the moment you unpack it, this printer is primed for action, featuring a direct drive extruder and an all-metal hot end capable of handling a diverse range of filaments.

With its automatic bed leveling sensor, achieving a flawless first layer is effortless, setting the stage for prints that are not only fast but also visually impressive. But speed is just one aspect of Bambu Lab’s creation; it’s also about reliability and versatility. The P1P offers a generous build volume of 256 x 256 x 256 mm, coupled with impressive speeds of up to 500 mm/s and an acceleration of 20,000 mm/s.

Bambu Lab P1P

Its direct drive extruder and high-temperature hot end enable seamless printing with various filaments such as PLA, PETG, and TPU.

What’s more, the P1P is designed with upgradability in mind. It is compatible with Bambu Lab’s Automatic Material System (AMS) for multi-color printing and can be customized further with printable mod plates, adding a layer of flexibility to meet evolving printing needs.

↪ Pros

  • Blazing Speed: The P1P’s speed is one of its standout features, making it capable of rapid printing without sacrificing quality.
  • Simple Auto Bed Leveling: The auto bed leveling system simplifies the printing process, especially for beginners.
  • DIY Custom Side Panels: Users can print their own side panels, allowing for a high degree of customization.
  • Optional Multicolor Capabilities: With the AMS unit, the P1P can handle multicolor prints, expanding creative possibilities.

↪ Cons

  • Appearance: Some may find the P1P’s “naked” look less appealing, as it comes without side panels.
  • Noise Level: The printer can be noisy during operation, which might be a concern in certain environments.
  • Proprietary Parts: The use of proprietary replacement parts can make maintenance and upgrades more costly.
  • Filament Wastage: When using the AMS unit, there can be a wastage of filament, which might be a consideration for cost-effective printing.

The Bambu Lab P1P is a compelling option for those looking for a high-speed, reliable 3D printer with the flexibility to upgrade and customize according to their needs.

4. Anycubic Kobra Max

Best for Large Prints

Pros

  • Enormous Build Size
  • Accurate Auto Bed Leveling
  • Convenient Build Plate
  • Comprehensive Kit

Cons

  • Large Footprint
  • Bed Slinger Design
  • No Larger Nozzle Included
  • Slow Printing

The Anycubic Kobra Max emerges as a formidable force in the realm of 3D printing, offering an expansive build volume that empowers creators to bring their grandest ideas to life. With its responsive touchscreen interface and impressive printing speed, the Kobra Max stands out as a leader in FDM printing.

Its sturdy frame and automatic bed leveling system provide stability and precision, making it the go-to choice for those tackling ambitious projects. Designed to cater to hobbyists, enthusiasts, and professionals alike, the Anycubic Kobra Max boasts a generous build volume of 400 x 400 x 450 mm, ideal for large-scale prints. Navigating and controlling the printer is a breeze thanks to its user-friendly 4.3-inch LCD touchscreen interface.

Anycubic Kobra Max

With a maximum printing speed of 180mm/s, significantly faster than many competitors, it ensures rapid progress without compromising on quality. Additionally, its robust aluminum frame ensures consistent stability and precision throughout the printing process.

↪ Pros

  • Enormous Build Size: The large build volume is perfect for printing big items like props and costume helmets in one go.
  • Accurate Auto Bed Leveling: The auto leveling system provides very accurate results, enhancing the ease of use.
  • Convenient Build Plate: The coated glass bed releases prints when cool, making it easy to remove finished objects.
  • Comprehensive Kit: The printer comes with all the necessary tools and a sample of PLA to get started.

↪ Cons

  • Large Footprint: Due to its size, the Kobra Max requires a significant amount of space to operate.
  • Bed Slinger Design: The bed slinger design might be a drawback for some users.
  • No Larger Nozzle Included: It doesn’t come with a larger nozzle, which could be useful for faster printing of large objects.
  • Slow Printing: Despite its high maximum speed, the actual printing process can be slow.

The Anycubic Kobra Max is a budget-friendly option for those needing a large build volume and is praised for its automatic bed leveling system and touchscreen interface. However, potential buyers should consider the trade-offs in terms of the printer’s size and the speed of operation.

READ MORE: How to Setup and Configure a Wireless Printer in Windows 11 ➜

5. Toybox 3D Printer

Best for Newbies/Children

Pros

  • Ease of Use
  • Creative Freedom
  • Kid-Friendly Design
  • Educational Value

Cons

  • Small Build Area
  • Internet Dependency
  • Unheated Bed
  • Proprietary Filament

The Toybox 3D Printer brings a delightful touch of innovation, igniting the joy of creation for both kids and adults alike. Its compact and user-friendly design reshapes the concept of play by allowing users to effortlessly design and print their own toys. With a simple and intuitive interface, the Toybox welcomes everyone into the world of 3D printing, making it an ideal introduction for young enthusiasts.

Featuring a modest build volume of 7 x 8 x 9 cm, perfectly suited for small hands and big imaginations, the Toybox operates at a speed of 60 mm/s with a resolution of 200 microns, ensuring precise printing of each toy. Its 4mm Smooth-Flow Extruder Head and Easy-Peel bed simplify the printing process, eliminating any hassles along the way.

Toybox 3D Printer

Compatibility with STL, OBJ, and gCode file formats, along with easy connectivity via 2.4GHz Wi-Fi, makes sending designs from a smartphone or tablet to the printer a seamless experience. With the Toybox, the magic of creating and bringing ideas to life is right at your fingertips.

↪ Pros

  • Ease of Use: The Toybox is renowned for its reliable, misprint-free printing and one-touch operation, making it a joy for kids and beginners.
  • Creative Freedom: With access to more than 2,000 printable toys and projects, plus the ability to create your own designs, the possibilities are endless.
  • Kid-Friendly Design: The printer’s all-metal frame is sturdy with rounded edges, and the operation is so simple that children can use it with minimal supervision.
  • Educational Value: It introduces children to the basics of 3D printing and design, fostering creativity and problem-solving skills.

↪ Cons

  • Small Build Area: The Toybox’s build area is relatively small, which may limit the size of toys that can be printed.
  • Internet Dependency: The printer requires an internet connection to access its library of designs, which might be a limitation in some scenarios.
  • Unheated Bed: The lack of a heated bed means that prints may not adhere as well as they would with other printers, potentially affecting print quality.
  • Proprietary Filament: The printer is designed to use its own brand of filament, which could limit the variety of materials you can use and may increase the long-term cost.

The Toybox 3D Printer stands out as a gateway to 3D printing, offering a fun and educational experience that encourages users to think creatively and bring their ideas to life.

READ MORE: Ultimate Guide to Designing and Printing Your Own T-Shirt at Home ➜

Conclusion

As we finish our look at the top 5 3D printers for beginners in 2024, it’s clear that 3D printing is now easier to get into. These printers offer a lot of possibilities, whether it’s making new things, learning, or just having fun.

Picking the right printer is a personal choice based on what you need and what you can spend. We hope this guide helped you decide. Remember, the best printer is the one that fits your needs and keeps up with what you want to do.

As you start printing, remember that every layer you make helps you get better. These printers are here to help you turn your ideas into real things.

FAQs

What should I look for in a beginner-friendly 3D printer?

Look for printers with an easy setup, intuitive controls, good customer support, and a robust online community.

How much should I expect to spend on my first 3D printer?

ntry-level 3D printers can range from $200 to $500, depending on features and quality.

Can I print anything I want with these 3D printers?

You can print a wide variety of objects, but always check the printer’s material compatibility and build volume limits.

3D printing safe to do at home?

Yes, if you follow the manufacturer’s safety guidelines, such as proper ventilation and not touching hot surfaces.

What maintenance is required for a 3D printer?

Regular maintenance includes cleaning the build plate, lubricating moving parts, and updating firmware.

What if my prints are failing or not coming out right?

Check for common issues like bed leveling, filament quality, and slicer settings. Online communities can also offer support.

The post The 5 Best 3D Printers for Beginners in 2024 [All Budgets] appeared first on Appuals.

]]>
https://appuals.com/best-3d-printer-for-beginners/feed/ 0
Fix: Professional Mode Not Working in Epson Scan 2 https://appuals.com/professional-mode-epson-scan-not-working/?utm_source=rss&utm_medium=rss&utm_campaign=professional-mode-epson-scan-not-working https://appuals.com/professional-mode-epson-scan-not-working/#respond Fri, 15 Sep 2023 17:23:49 +0000 https://appuals.com/?p=358461 The Professional Mode within Epson Scan 2 is designed for expertly scanning images, negatives, films, and more. However, failing to utilize the Professional Mode in the Scan 2 application can have a negative impact on the quality, efficiency, and time required for the scanning process. The option for Professional Mode might not be displayed, could …

The post Fix: Professional Mode Not Working in Epson Scan 2 appeared first on Appuals.

]]>
The Professional Mode within Epson Scan 2 is designed for expertly scanning images, negatives, films, and more. However, failing to utilize the Professional Mode in the Scan 2 application can have a negative impact on the quality, efficiency, and time required for the scanning process.

Epson Scan 2 Professional Mode Not Working
Epson Scan 2 Professional Mode Not Working

The option for Professional Mode might not be displayed, could appear greyed out, or selecting it might not yield any response from the Scan 2 application. An update to the app or the device’s OS is reported to trigger the issue.

How to Make Professional Mode Work on Epson Scan 2

We will try to make Professional Mode work on Epson Scan 2 by using different techniques, and if all else fails, reinstalling the utility will be the last option.

1. Change the Mode of Epson Scan 2

A malfunction in the mode selection of the Scan 2 app might trigger the Professional Mode issue. This can be solved by changing the mode of the Scan 2 app and reverting it to the Professional Mode.

  1. Launch the Epson Scan 2 and open the Mode dropdown.

    Change Scan Mode of Epson Scan 2
    Change the Scan Mode of Epson Scan 2
  2. Select another mode (except the Professional Mode) and complete a scan.
  3. Switch to the Professional Mode and verify if it is operating correctly.

2. Launch the Epson Scan 2 Utility as Admin

If the Professional Mode needs access to a protected system resource but the Scan 2 utility does not have the required privileges, you will not be able to use the required mode. To solve this, launch the Epson Scan 2 application as an administrator.

  1. Right-click on the Epson Scan 2 and select Run as Administrator. You can find the utility in the following location on an X64 PC:
    C:\Program Files (x86)\epson\Epson Scan 2\Core

    Launch Epson Scan 2 as an Administrator
    Launch Epson Scan 2 as an Administrator
  2. In the UAC prompt, click Yes and confirm if the Professional Mode is operating.

3. Reboot Your Device and Scanner

A malfunction in the input modules of the system will not let you use Professional Mode in Epson Scan 2. Here, rebooting your device and scanner will do the trick.

  1. Exit the Epson Scan 2 utility and switch off the scanner.
  2. Unplug its USB cable from the system and power off your system.

    Unplug Cable of Epson Scanner
    Unplug the Cable of the Epson Scanner
  3. Power on your system and connect the scanner back to another USB port of the system.
  4. Disconnect and reconnect the TPU cable at the back of the scanner.
  5. Launch Epson Scan 2 and confirm if the Professional Mode issue is resolved.

4. Reset the Epson Scan 2 to the Defaults

You will not be able to use Professional Mode on the Epson Scan 2 if it has a conflicting configuration enabled. Additionally, if the files holding the utility’s configurations are damaged, it will also result in the issue at hand. In such a scenario, resetting the Epson Scan 2 utility to its default settings will solve the problem.

  1. Navigate to the following path:
    64-bit
    
    C:\Program Files (x86)\epson\Epson Scan 2\Utility 
    
    32-bit
    
    C:\Program Files\epson\Epson Scan 2\Utility
  2. Launch Epson Scan Maintenance Utility and set the operation dropdown to Reset Epson Scan/Epson Scan 2. 

    Reset Epson Scan 2 to its Default Settings
    Reset Epson Scan 2 to its Default Settings
  3. Click on the Start button and once done, see if the problem is solved.
  4. If not, go to the Configuration tab of the Epson Scan 2 and click on Reset to Defaults.
  5. Restart the system and verify if the issue is resolved.

5. Update the Device’s OS and Epson Scan 2

You will not be able to use the Professional Mode on Epson Scan 2 if the device’s OS or the application itself is outdated. This will cause incompatibility between the device and the Epson app. To fix this, update the device’s OS and Epson Scan 2.

Update the Device’s OS

To update Windows:

  1. Right-click on Windows and go to Settings > Windows Update.
  2. In the right pane, click on Check for Updates and install all the available updates.

    Check for Windows Updates
    Check for Windows Updates
  3. Restart the system and launch Epson Scan 2. Verify if the Professional Mode is working.

Update the Epson Scan 2

  1. Launch a web browser and navigate to the Epson website.
  2. Go to Support > Scanners > your scanner model > Drivers > Scanner Driver and Epson Scan 2 Utility.

    Download Epson Scan 2
    Download Epson Scan 2
  3. Download it and install it (without uninstalling the current installation).
  4. Launch it and see if the problem is solved.
  5. If not, download Scan Patch for User Interface for your scanner from the Epson website and install it.
  6. Launch Epson Scan 2 and verify if the issue is resolved.

6. Delete the Scanner from Printers and Scanners

If the scanner configurations in the system’s settings are not valid, the settings retrieved by the Scan 2 utility will fail to display the Professional Mode or make it work. This can be fixed by deleting the scanner from Printers and Scanners and re-adding it.

  1. Right-click on Windows and go to Settings > Bluetooth & Devices > Printers & Scanners.

    Open Printers and Scanners in Windows Settings
    Open Printers and Scanners in Windows Settings
  2. Select the Epson scanner and click on Remove.
  3. Confirm to remove the scanner and restart the system.
  4. Add the scanner back to the system, and verify if the Professional Mode is working correctly.

7. Reinstall the Epson Scan 2 Application

You will not be able to use Professional Mode on the Epson Scan 2 if the essential modules of the application are damaged and fail to execute correctly. Here, reinstalling the Epson Scan 2 application will solve the problem.

To do so on a Windows PC:

  1. Disconnect the Epson scanner from the PC and delete the scanner from the Printers and Scanners (discussed earlier).
  2. Right-click Windows and select Apps & Features.
  3. Expand the Epson Scan 2 application and click on Uninstall.

    Uninstall Epson Scan 2 on Windows
    Uninstall Epson Scan 2 on Windows
  4. Follow the prompts to uninstall the Epson application and restart the device.
  5. Launch a web browser and go to the Epson website.
  6. Navigate to Support > Scanners > your scanner model > Drivers > Scanner Driver and Epson Scan 2 Utility.
  7. Launch the installer as administrator and follow the prompts to complete the process.

    Launch the Installer of Epson Scan 2 as Administrator
    Launch the Installer of Epson Scan 2 as Administrator
  8. Launch Epson Scan 2 and hopefully, its Professional Mode will be working correctly.

If this does not work, check if you can use Professional Mode on the Epson Scan 2 on another system. If that is not an option, contact Epson Support for further assistance. Till then, you can try another compatible scanning app (e.g., VueScan) with your scanner.

The post Fix: Professional Mode Not Working in Epson Scan 2 appeared first on Appuals.

]]>
https://appuals.com/professional-mode-epson-scan-not-working/feed/ 0
How to find and install compatible Printer drivers? https://appuals.com/best-places-to-find-printer-driver/?utm_source=rss&utm_medium=rss&utm_campaign=best-places-to-find-printer-driver https://appuals.com/best-places-to-find-printer-driver/#respond Wed, 09 Aug 2023 23:00:39 +0000 https://appuals.com/?p=348616 Keeping your printer drivers up to date is crucial for smooth printing operations and to take advantage of new features and bug fixes. In this guide, we will explore the best places to obtain the latest printer drivers, considering different scenarios and providing you with detailed options. Let’s dive in and discover the ideal sources …

The post How to find and install compatible Printer drivers? appeared first on Appuals.

]]>
Keeping your printer drivers up to date is crucial for smooth printing operations and to take advantage of new features and bug fixes. In this guide, we will explore the best places to obtain the latest printer drivers, considering different scenarios and providing you with detailed options. Let’s dive in and discover the ideal sources for obtaining the latest printer driver.

The Best Places to Find the Latest Printer Driver.
The Best Places to Find the Latest Printer Driver.

In the following sections, we will explore the best places to obtain the latest printer driver, catering to various scenarios and providing detailed options for obtaining the most up-to-date software.

1: Printer Manufacturer’s Official Website

The first and most reliable source for obtaining the latest printer driver is the official website of the printer manufacturer. Reputable printer manufacturers maintain dedicated support sections on their websites, providing access to the latest drivers and software for their printers. Here’s how you can obtain the latest driver from the manufacturer’s website:

  1. Visit the official website of your printer manufacturer.
  2. Look for the “Support” or “Drivers” section on the website.

    Look for the "Support" or "Drivers" section on the website.
    Look for the “Support” or “Drivers” section on the website.
  3. Locate your printer model by entering the model number or navigating through the product categories.
  4. Once you find your printer model, you will typically find a list of available drivers for different operating systems.
  5. Select the driver compatible with your operating system and click on the download link.

    Select the driver compatible with your operating system and click on the download link.
    Select the driver compatible with your operating system and click on the download link.
  6. Follow the provided instructions to install the driver on your computer.

Downloading drivers from the manufacturer’s official website ensures that you have the genuine software specifically designed for your printer model. It provides a reliable and trusted source for obtaining the latest printer driver.

2: Operating System Updates

Operating systems like Windows, macOS, and Linux often include a database of drivers for various hardware devices, including printers. These operating systems periodically release updates that may include the latest printer drivers. Here’s how you can check for printer driver updates through your operating system:

  • Windows: On Windows, you can access printer driver updates through the Windows Update feature. Go to the “Settings” menu, select “Update & Security”. and click on “Windows Update”. Windows will automatically search for available updates, including printer driver updates. If any printer driver updates are found, they will be listed for installation.

    Go to Windows Update to update ur printer drivers on Windows.
    Go to Windows Update to update ur printer drivers on Windows.
  • macOS: macOS provides updates for printer drivers through the “Software Update” feature. Click on the Apple menu, select “System Preferences”. and choose “Software Update”. If there are any printer driver updates available, they will be displayed for installation.
  • Linux: Linux distributions often have dedicated package managers or software update utilities that handle driver updates. Depending on your Linux distribution, you can use the respective package manager or software update utility to check for printer driver updates. Refer to the documentation or support resources for your specific Linux distribution for more information.

By keeping your operating system updated, you can ensure that you have the latest printer driver provided by the operating system manufacturer.

3: Dedicated Driver Download Websites

If you are unable to find the necessary driver from the printer manufacturer’s website or through operating system updates, there are dedicated driver download websites that can serve as an alternative source. These websites collect and provide drivers for various devices, including printers. However, it is important to exercise caution when using third-party websites. Here are a few reputable driver download websites:

  • Driver Guide: Driver Guide offers a vast collection of drivers, including printer drivers. They provide a user-friendly interface, detailed driver information, and instructions for installation.
  • Driver Pack Solution: Driver Pack Solution is a comprehensive driver update tool that can automatically detect and install the latest printer drivers. It simplifies the driver update process and ensures you have the most up-to-date drivers for your devices.
  • Softpedia: Softpedia is a trusted software and driver download website that hosts a wide range of printer drivers. They ensure the drivers available for download are free from malware and provide user reviews and ratings for additional guidance.

When using dedicated driver download websites, always verify the source, read user reviews, and ensure that the website is trustworthy. Exercise caution to avoid downloading drivers from unreliable sources that may contain malware or outdated drivers.

In conclusion, ensuring that you have the latest printer driver is essential for optimal performance and compatibility. Whether you choose to obtain the driver from the printer manufacturer’s official website, rely on operating system updates, explore dedicated driver download websites, or use automatic driver update software, it is important to prioritize reliability, compatibility, and ease of installation. By obtaining the latest printer driver, you can ensure smooth printing operations and take advantage of new features and bug fixes.

What Are the Best Places to Find the Latest Printer Driver - FAQs

How often should I update my printer driver?

It is recommended to check for printer driver updates periodically, such as every few months or when you encounter compatibility or performance issues. Keeping your drivers up to date ensures optimal printing functionality.

Can I use third-party driver download websites for printer drivers?

While some third-party driver download websites are reputable, it is important to exercise caution. Verify the source, read user reviews, and ensure that the website is trustworthy before downloading drivers.

Do I need to uninstall the old printer driver before installing the new one?

In most cases, the new driver installation will automatically replace the old one. However, if you encounter any issues, it is recommended to uninstall the old driver first before installing the latest version.

Can I use generic printer drivers?

Generic printer drivers can provide basic functionality, but it is best to use the specific drivers designed for your printer model. Generic drivers may lack certain features or optimizations.

Why is it important to update printer drivers?

Updating printer drivers ensures compatibility with the latest operating systems and applications, improves performance, fixes bugs, and introduces new features.

The post How to find and install compatible Printer drivers? appeared first on Appuals.

]]>
https://appuals.com/best-places-to-find-printer-driver/feed/ 0
Fix: Operation could not be completed (Error 0x000005b3) https://appuals.com/operation-could-not-be-completed-error-0x000005b3/?utm_source=rss&utm_medium=rss&utm_campaign=operation-could-not-be-completed-error-0x000005b3 https://appuals.com/operation-could-not-be-completed-error-0x000005b3/#respond Sat, 20 May 2023 20:43:25 +0000 https://appuals.com/?p=296965 When attempting to connect to a network printer, you may encounter the error “The operation could not be completed. Error 0x000005b3.” This error is typically caused by corruption in the printer driver, resulting in an operational error for the network printer. To resolve this issue, follow the steps below to fix Error 0x000005b3 on your …

The post Fix: Operation could not be completed (Error 0x000005b3) appeared first on Appuals.

]]>
When attempting to connect to a network printer, you may encounter the error “The operation could not be completed. Error 0x000005b3.” This error is typically caused by corruption in the printer driver, resulting in an operational error for the network printer.

Operation Failed with Error 0x000005b3
Operation Failed with Error 0x000005b3 Fix

To resolve this issue, follow the steps below to fix Error 0x000005b3 on your network printer:

Workaround: Restart your Computer Properly

An improper Windows shutdown can cause driver issues, including the one you are experiencing. As a workaround, it is recommended to fully restart your computer to resolve the issue. Follow the steps below to perform a proper system shutdown:

  1. Open the Windows Start Menu by pressing the Win key.
  2. Restart your computer by clicking on the Power option and selecting “Restart”

    Restarting the Windows computer
    Restarting the Windows computer
  3. After restarting the computer, all the drivers will boot properly. 

1. Run the Printer Troubleshooter

Windows includes a built-in Troubleshoot feature that can scan and suggest solutions for various Windows issues.

To address the error you are encountering, you can utilize the Printer Troubleshooter, which is designed to identify and resolve problems related to printers. Follow the instructions below to run the Printer Troubleshooter:

  1. Open the Windows Settings with Win + I.
  2. Navigating to Update and Security > Troubleshoot > Printer.
  3. Click on the “Run Troubleshoot” option under Printer.

    Running the Printer Troubleshooter
    Running the Printer Troubleshooter
  4. When the troubleshooter detects any problem, it will fix them.
  5. Restart your system to make the necessary changes.

2. Update Printer Drivers

Having an outdated driver is the most likely cause of the Printer Driver error. When you continue using an older version of a driver, it can prevent certain actions from being performed on your Windows computer.

Therefore, you should check if an update is available for your installed printer driver before connecting the network printer. Follow the steps below to update the installed printer driver on your system:

  1. Open the Run command with the Win +R keys.
  2. Type” devmgmt.msc” and click OK.

    Opening Device Manager using Run Program
    Opening Device Manager using Run Program
  3. Click on the “Print queues” option.
  4. Right-click on the installed driver and select the “Update Driver” option.

    Updating Printer Driver
    Updating Printer Driver
  5. Now, choose an option to search for an update automatically.

    Searching for a driver automatically
    Searching for a driver automatically
  6. After the system has found the best driver, click on the “Search for updated drivers on Windows Update” option. 

    Searching for updated drivers on Windows Update
    Searching for updated drivers on Windows Update
  7. If there is an available patch on the Windows Update page, check each box and select the “Download and Install” option.  Restart your computer to make the required changes.

3. Delete Temporary Files 

Your system saves cache as temporary files. When this cache becomes corrupted, it can cause errors in some drivers. Therefore, you should ensure that you delete all the temporary files saved on your system, as they could be the reason why your network printer is not starting.

  1. Open the Run command with the Win +R 
  2. Type “%temp%” and click OK.

    Opening the temporary file directory
    Opening the temporary file directory
  3. Click on the “View” tab and check the “Hidden Items” box on top of the window.
  4. Delete all temporary files by pressing the Ctrl+ A +Delete. 

    Deleting Temporary Files
    Deleting Temporary Files
  5. Restart your computer and make the required changes.

4. Set full permission for SYSTEM Account

When a driver fails to access certain System Account permissions, it is prevented from starting. To resolve this issue, you need to ensure that the driver is granted all necessary System Account permissions by adjusting the driver’s security settings. Follow the steps below to change the driver security settings:

  1.  Open the File Explorer with Win +E keys.
  2.  Paste the following path into the search bar:
    C:\Windows\System32\spool
  3.  Right-click on the “drivers” folder and select the Properties option. 

    Opening drivers properties
    Opening drivers properties
  4. Open the “Security” tab.
  5. Select the “SYSTEM” option under “Group or user names.”
  6. Click on the Edit button and change the permissions to “Allow”.

    Editing System Permissions
    Editing System Permissions
  7. Select the “SYSTEM” option under “Group or user names.”
  8. Check the “Allows” boxes of all SYSTEM permissions.
  9. Confirm the changes by clicking on Apply and OK.

    Confirming changes to System permissions
    Confirming changes to System permissions
  10. Lastly, restart your computer.

5. Run the Print Spooler Service Automatically

You may also encounter an error message from your network printer if the Print Spooler service fails to start automatically. This can occur if your Print Spooler service is currently set to a manual startup type. To resolve this issue, follow the steps below to change the Print Spooler service to an automatic startup:

  1. Open the Run command with the Win + R 
  2. Type “service.msc” and click OK

    Opening Windows Services
    Opening Windows Services
  3. Find the “Print Spooler” service and open its properties by right-clicking on it and selecting the “Properties” option.

    Opening Print Spooler properties
    Opening Print Spooler properties
  4. Open the “General” tab and change Startup Type to “Automatic“.
  5. Confirm the changes by clicking on Apply and OK

    Setting the Print Spooler Startup type
    Setting the Print Spooler Startup type

The post Fix: Operation could not be completed (Error 0x000005b3) appeared first on Appuals.

]]>
https://appuals.com/operation-could-not-be-completed-error-0x000005b3/feed/ 0
How to Fix the Printer Error 0x00000bbb in Windows? https://appuals.com/printer-error-0x00000bbb/?utm_source=rss&utm_medium=rss&utm_campaign=printer-error-0x00000bbb https://appuals.com/printer-error-0x00000bbb/#respond Sat, 31 Dec 2022 09:06:37 +0000 https://appuals.com/?p=292656 The printer error 0x00000bbb occurs when the users try to create a print job in Windows using an installed printer. Apparently, this issue occurs with certain printers when Windows fails to recognize them.  The problem is typically caused by corrupt updates and corruption issues within the system. Below, we have discussed several ways of fixing …

The post How to Fix the Printer Error 0x00000bbb in Windows? appeared first on Appuals.

]]>
The printer error 0x00000bbb occurs when the users try to create a print job in Windows using an installed printer. Apparently, this issue occurs with certain printers when Windows fails to recognize them. 

Printer Error 0x00000bbb
Printer Error 0x00000bbb

The problem is typically caused by corrupt updates and corruption issues within the system. Below, we have discussed several ways of fixing this problem once and for all. 

1. Run the Printer Troubleshooter

In case of facing any printer-related issues on your Windows computer, the first thing that you should do is run the printer troubleshooter. This utility can be found in the Settings app and works by scanning the system for printer-related issues. 

Here is how you can run the printer troubleshooter:

  1. Press the Win + I keys together to open Windows Settings.
  2. Navigate to System > Troubleshoot > Other troubleshooters.

    Click on the Other troubleshooters option
    Click on the Other troubleshooters option
  3. Now, locate the Printer troubleshooter and click on the Run button associated with it.

    Run the printer troubleshooter
    Run the printer troubleshooter
  4. Wait for the troubleshooter to complete its scan and then check the results.
  5. If the troubleshooter suggests you solutions, click on Apply this fix. Otherwise, click on Close the troubleshooter and move to the next method below.

    Apply the fixes by the troubleshooter
    Apply the fixes by the troubleshooter

2. Add New Port on Problematic Printer

The problem can also occur with the port Windows is trying to use. If this scenario is applicable, then creating a new port and directing Windows to it will fix the problem. 

Here is how you can do that:

  1. Press the Win + I keys to open Windows Settings.
  2. Navigate to Bluetooth & devices > Printers & scanners

    Access the Printers & scanners option
    Access the Printers & scanners option
  3. Now, select the problematic printer and click on Printer properties in the next window.

    Click on the Printer properties
    Click on the Printer properties
  4. Head over to the Ports tab and click on Add Port.

    Click on the Add port button
    Click on the Add port button
  5. Select the Standard TCP/IP port and add the IP address of your printer.

    Choose the Standard printer port
    Choose the Standard printer port
  6. Once done, press the Win + R keys together to open a Run dialog.
  7. Type cmd in the text field of Run and press the Ctrl + Shift + Enter keys together.
  8. Click Yes in the User Account Control prompt.
  9. Type the following commands in the Command Prompt one by one and hit Enter after each to execute them.

    cd C:\Windows\System32\spool
    cacls.exe PRINTERS /E /G administrator:C

    Execute the entered commands
    Execute the entered commands
  10. Once done, restart your computer and check if the issue is resolved.

3. Update the Printer Driver

Your printer driver might be outdated or corrupt, causing your system to be incompatible with your printer. In this case, updating the printer driver can fix the problem.

Here is how you can update your printer driver on Windows:

  1. Press Win + R to open a Run dialog.
  2. Type devmgmt.msc in the text field and click Enter.
  3. In the Device Manager window, locate the Printers section and expand it.
  4. Right-click the targeted driver and choose Update driver.

    Click on the Update driver button
    Click on the Update driver button
  5. Then click on Search automatically for drivers and follow the instructions to install the updates.

    Let the Device Manager search for updated drivers
    Let the Device Manager search for updated drivers
  6. Once done, restart your computer and check if the issue is resolved.

Manually updating the driver is also an option if the system cannot find any updates. In this case, follow these steps:

  1. Go to your printer manufacturer’s website in your default browser.
  2. There you will find the latest version of the printer driver. Download and install it.
  3. Once done, expand the Printers section in Device Manager.
  4. Right-click on the problematic printer and choose Update driver.
  5. Select Browse my computer for drivers in the next window.

    Click on the Browse my computer for drivers
    Click on the Browse my computer for drivers
  6. Go to the folder where you installed the latest driver software and select it.
  7. Once the update process has completed, check if the error has been resolved.

4. Restart the Print Spooler Services 

In order for the printer to work properly, the print spooler service must be running properly, and if it is not, problems like this will be encountered. It is usually possible to fix the problem by restarting the service.

Here is how you can restart the print spooler service:

  1. Press Win + R together to open Run.
  2. Type services.msc in Run and hit Enter.
  3. Right-click the Print Spooler service in the Services window.
  4. Choose Properties from the context menu.

    Click on the Properties option
    Click on the Properties option
  5. If the service is disabled, click the Start button.
  6. In case the service is already running, click on the Stop button, wait for a few seconds, and then click Start again.

    Click on the Stop button
    Click on the Stop button
  7. Select Automatic from the Startup type dropdown.
  8. Click on Apply > OK to save the changes.

5. Reinstall Your Printer

If all else fails, uninstall the printer driver and then reconnect the printer after removing it from the system and the device. Windows will automatically install the default printer driver when you connect your printer to the PC, hopefully resolving the error.

Follow these steps to proceed:

  1. Press the Win + R keys to open Run.
  2. Type control in the text field of Run and click Enter.
  3. Expand the View by dropdown in the Control Panel window and choose Large icons.

    Click on the Large icons option
    Click on the Large icons option
  4. Select Devices and Printers from the menu. Here you will find a list of all the printers installed on your computer. 

    Click on the Devices and Printers option
    Click on the Devices and Printers option
  5. Simply right-click the faulty printer and select Remove device.

    Click on the Remove device button
    Click on the Remove device button
  6. If a UAC prompt pops up, click on Yes.
  7. Once done, type Device Manager in Windows search and click Open.
  8. Look for the Print queues section, expand it, and right-click on the faulty printer.
  9. In the context menu, select Uninstall device.

    Choose the Uninstall device option
    Choose the Uninstall device option
  10. Now, launch Control Panel again.
  11. Head over to Uninstall a program under Programs.
  12. Right-click on all printer applications and select Uninstall.

    Uninstall the printer
    Uninstall the printer
  13. Then, disconnect the printer from the device and restart your computer.
  14. Upon reboot, connect the printer again.
  15. Finally, head over to the Devices and Printers section again in the Control Panel.
  16. Locate your printer, right-click on it and select Set as default printer from the context menu.

    Click on the Set as default printer button
    Click on the Set as default printer button

Hopefully, this should fix the problem once and for all.

The post How to Fix the Printer Error 0x00000bbb in Windows? appeared first on Appuals.

]]>
https://appuals.com/printer-error-0x00000bbb/feed/ 0
How to Fix “Error Code: Non-Printing Features are Available” Epson? https://appuals.com/epson-error-code-non-printing-features-are-available/?utm_source=rss&utm_medium=rss&utm_campaign=epson-error-code-non-printing-features-are-available https://appuals.com/epson-error-code-non-printing-features-are-available/#respond Sat, 18 Jun 2022 13:12:47 +0000 https://appuals.com/?p=248310 A lot of users reported that the “Epson Error Code Non-Printing Features are Available” while trying to print anything. The problem generally occurs when too many paper case units are installed on the printer and as a result prevent the users from printing anything. However, many users reported they see the error even though they …

The post How to Fix “Error Code: Non-Printing Features are Available” Epson? appeared first on Appuals.

]]>
A lot of users reported that the “Epson Error Code Non-Printing Features are Available” while trying to print anything. The problem generally occurs when too many paper case units are installed on the printer and as a result prevent the users from printing anything.

Epson Error Code Non-Printing Features are Available
Epson Error Code Non-Printing Features are Available

However, many users reported they see the error even though they haven’t installed many paper cassette units. So, in this case, it is estimated there is something wrong with the printer or the printer is damaged and due to this unable to establish a connection with the printer connector. Therefore, here we have done our research and found that there are multiple reasons why you are seeing the error during printing.

So, below have a look at the common culprits responsible for the error and then follow the step-by-step instructions to solve the Printer error. Contact Epson Support. Non-printing features are available.

  • Connection of Your Printer: If your printer is not connected properly to your computer then this error can show up. So, make sure to check the connection between your printer and device is established properly.
  • Printer Settings: If you use multiple printers, then check if the Epson one is set as the default printer or not. If it is not set as the default printer, then the Epson error code non-printing features are available could show up.
  • Outdated Printer driver: The driver plays an important role to allow the device to function properly, so if in case the printer driver is outdated, then the error can show up. In this situation updating the printer driver may work for you.
  • Print Spooler Service: The print spooler service available on your computer helps your computer to connect to the printer and if it is disabled, then the error can show up.
  • Using too many paper cassette units: This is the main reason that ends up showing the error, so if you have installed too many paper cassette units then this may cause the error. In this situation remove the extra unit and then check if the error still appears or not.
  • Damaged Product: If the product is damaged or corrupted then it starts causing issues while printing and start showing error. So, make sure your product is not corrupted and working properly.

So, these are the potential culprits that start causing errors, now follow the fixes given one by one to solve the error completely.

1. Unplug your Power Cable

There is a possibility that your printer is dealing with some sort of internal glitches and bugs. So, in this case, unplugging and then plugging the power cable works for you to solve the problem. Here follow the steps to do so:

  1. First, turn off the printer and then unplug all the power cables from the wall outlet for at least minimum
  2. Next Power on your printer for checking properly and check if the problem is resolved.

2. Check the Connection of Your Printer

There can be some sort of connection problem that is causing Epson error code non-printing features are available. So, check the connections of your printer.

Wired Printer

  1. Check if the printer is properly connected to the computer, unplug the wires, clean the ports and again plug the wires
  2. Try connecting the USB cable to another USB port of your computer.
  3. If you are using any hub to connect the printer, unplug it from the hub and connect it directly to the computer.
  4. Try changing the entire cable and check if the error is resolved or not.

Network Printer

  1. Check if the network speed is proper, and also check the network devices like the modem or the router.
  2. Then check the network connection status light of your printer.
  3. If the printer is connected via a network cable, you can also try changing that cable and see if it works for you.
  4. Disconnect and reconnect the computer and the printer to your home/work network.

Bluetooth Printer

  1. Check if Bluetooth is enabled on both devices.
  2. Try re-pairing your computer with the printer.
  3. Check if you are in the Bluetooth range of the device or not.

3. Set the Printer You are Using as Default Printer 

This error can also arise if the Epson printer you are using is not set as the default printer. So, it is recommended to set the Epson printer you are using as the default printer, to do so follow the steps mentioned below:

  1. Press Windows + R on the keyboard to open the Run dialogue box.
  2. Then in the dialogue box, type control and press enter.

    Access the Control Panel menu
  3. Now click on the Devices and Printers option.

    Open Devices and Printers
  4. Next right-click on the printer you are using and click on the Set as a default printer

    Setting the Default Printer on Windows 10

Now check if the Epson error code non-printing features are available is resolved or not.

4. Update the Drivers of Your Printer

If you haven’t updated the drivers of your printer for a while, we recommend you to update the drivers of your printer as this error code can arise due to outdated printer drivers too. To update the drivers of your printer, follow the steps mentioned below:

  1. Click on the Start icon and search for the Device Manager in the search bar.
  2. Then click on the Device Manager option and search for your printer’s name.

    Opening up Device Manage
  3. Now right-click on your printer’s name and click on the updated driver

    Updating the printer driver
  4. And click on the search for the updated drivers automatically

    Updating Printer Driver
  5. If Windows cannot find the drivers, then you need to download the drivers manually from the Epson official site and install them.
  6. Once you are done updating the printer drivers, check if the error is resolved or not.

5. Check Whether the Print Spooler Service is Enabled or Disabled

Printer Spooler service is a service on your computer that manages the print jobs and is the communication system between your computer and your printer. If the service is disabled by any means, then your printer will not work and Epson error code non-printing features are available can also arise. So, it is recommended to check if the Print Spool service is enabled or disabled and if it is disabled then make sure to enable it. To enable the Print Spooler service to follow the steps mentioned below:

  1. Press Windows + R on your keyboard to open the Run dialogue box.
  2. Then type services.msc in the dialogue box and press Enter.

    Type “services.msc” into the Run dialogue and press Enter
  3. Now search for the Print Spooler and click on it.

    Print Spooler Service
  4. And check if the Startup type is set to Automatic and the Service Status is Running.

    Configuration of Printer Spooler Services
    Configuration of Printer Spooler Services
  5. If not then set it to automatic and click on the Start Button.
  6. Now click Ok and check if the printer is working properly or not.

Now check if the Printer Spooler keeps stopping problem is fixed.

6. Clear the Printer Queue

You will not be able to use your printer if your print queue is stuck which can also cause the error. So, it is recommended to clear the print queue and to do so follow the steps mentioned below:

  1. Press Windows + R on the keyboard to open the Run dialogue box.
  2. Now type services.msc in the Run dialogue box and press enter.

    Type “services.msc” into the Run dialogue and press Enter
  3. And in the Services window search for Print Spooler and double click on it.

    Print Spooler Service
  4. In the Print Spooler window, click on the stop button and press Ok.
  5. Next, minimize it and click on the File Explorer available in the taskbar.

    Opening up File Explorer
  6. Then click on the path space available at the top and enter this path: %windir%\System32\spool\PRINTERS

    Go to the location %windir%\System32\spool\PRINTERS
  7. And delete all the files in the folder.
  8. Now open the service windows and go back to Print Spooler and start the service.
  9. Lastly, close all the tasks and restart both your computer and your printer and check if the issue is resolved or not.

7. Try Using a Different Product

There can be an issue with the program you are trying to print your documents with, so you should try a different program to print the document if the fixes mentioned above didn’t work for you. Download and install any trusted alternative of the application you are using and try to give the print command and check if the issue is resolved or not.

8. Check the Hardware of Your Printer

If all the methods mentioned above didn’t work for you, then we will suggest you check the hardware of your printer and solve the printer offline problem.

  1. Check if the ink and toner of your printer are Ok.
  2. And check if there is an error displayed on the screen of your printer.
  3. Check if your printer is serviced or not, if not then service it.

That’s all for how to fix Epson error code non-printing features are available. Hope the solutions given work for you but if in case you are still seeing the error then contact the Epson support centre or the authorized Epson service provider for requesting repairs. 

The post How to Fix “Error Code: Non-Printing Features are Available” Epson? appeared first on Appuals.

]]>
https://appuals.com/epson-error-code-non-printing-features-are-available/feed/ 0
How to Fix “Error Code 0xC4EB827F” on HP Printers? https://appuals.com/hp-printer-error-0xc4eb827f-windows/?utm_source=rss&utm_medium=rss&utm_campaign=hp-printer-error-0xc4eb827f-windows https://appuals.com/hp-printer-error-0xc4eb827f-windows/#respond Tue, 05 Apr 2022 08:54:03 +0000 https://appuals.com/?p=240954 Error code 0xC4EB827F comes in the category of the standard error messages of the HP printers. Hence, all those users who possess an HP printer have faced this error code once or twice. In most cases, it has been observed that this error is triggered by software issues. However, this error code is caused by …

The post How to Fix “Error Code 0xC4EB827F” on HP Printers? appeared first on Appuals.

]]>
Error code 0xC4EB827F comes in the category of the standard error messages of the HP printers. Hence, all those users who possess an HP printer have faced this error code once or twice. In most cases, it has been observed that this error is triggered by software issues.

error message OXC4EB827F
Error message OXC4EB827F

However, this error code is caused by hardware problems in some situations. If you are one of those users getting this error on their HP Printer and want to know how to fix HP printer error code 0xC4EB827F, then follow this article.

When you are printing essential documents on an HP printer. You may realize that the “error code- oxc4eb827f has disrupted the printing process.” This is caused by an excess of faulty registries on your machine.

  • Print Cartridge Mechanism – Perhaps the print cartridge mechanism is unable to operate freely owing to dust particles or another impediment.
  • Inappropriate movement in the printerIf some physical movement happens in or around the print cartridge mechanism.
  • Defective encoder strip – The presence of this error might also be caused by a dirty or defective encoder strip.
  • Internal technical failure – The error may be the consequence of a hardware fault (paper jam, damaged rails), or a defective disc.

As you can see, some of the above-mentioned causes, such as broken rails or a damaged encoder strip, demand hardware replacement, while others may be resolved by following the hardware maintenance procedure.

There are several methods for removing this error number from your HP printer. Some of the more successful methods are listed here. Examine them and try to apply them as directed.

Reboot the HP Printer

Most HP printer customers erase this error number by restarting their printer and the associated PC. And it’s probable that the same approach will work for your printer as well. 

As a result, we urge that you try this strategy before attempting any other alternatives.

  1. Remove the HP Ink Cartridge: Before turning on your HP printer, please ensure that the ink cartridge has been removed. Unplug the power cord from the printer’s backside.

    remove the hp ink cartridge
     Remove the HP ink cartridge
  2. Turn off all devices: Turn down your computer and the router to which the printer is connected. Wait at least one minute.
  3. Connect the Power Chord Returning to the HP Printer: Simply reconnect the power cord to the printer and reload the cartridges when prompted.
  4. It’s Always a Good Idea to Make a Backup: Make a backup to save time in the future.
  5. Power up your HP printer.

link cardridge problem
Link cartridge problem

Once you’ve completed the preceding steps, switch on your printer, PC, and wireless router, if applicable. Now run a test page to see if the error code ox4eb827f is still present.

Use the Windows Troubleshooting Tool 

Microsoft provides a diagnostic tool for repairing Windows devices. You may use this to resolve HP printer problem number 0xc4eb827f on Windows 10. 

  1. Go to the Start menu, type “troubleshoot” into the search box, then hit the Enter key.
  2. Select “Troubleshooting” from the search results and wait for a new window to emerge.
  3. Locate the “Hardware and Sound” option and choose “Printer” from the drop-down menu.

    use troubleshooting tool
     Use Troubleshooting tool
  4. When the next box appears, click “Advanced” and select “Run as Administrator.”

windows troubleshooting
Windows troubleshooting

Also, HP printer customers must select “Next” to begin troubleshooting. It will take a few minutes for this utility to discover the HP printer fault. To resolve the HP printer error number 0xc4eb827f on Windows PCs, click “Next” one more. Restart the printer and print without further disruption.

Repair Any Damaged or Corrupted Registry Keys

SFC may be used by Windows 10 users to repair damaged registry keys. To correct this problem, it replaces the destroyed registers with their cached counterparts. 

  1. Hold down the Windows and R keys at the same time, wait for the Run box to appear, and then type “cmd.” 
  2. In the Command Prompt window, type “sfc/scannow” and hit the Enter key.

SC will then search the device’s compressed folder for damaged system files and replace them with fresh ones. You may also use the DISM program to repair damaged files. To resolve this HP printer, use the automated startup repair tool.

To fix the Windows 10 registry, reset the device. Before you do anything else, make a backup of the important files. You may also utilize Cloud reset to reinstall the Windows registry files

Start the Print Spooler Service Again

This issue might arise simply because the Print Spooler service has gotten inactive. As a result, we recommend that you restart this service and see whether it works.

  1. To launch Run, press Win + R.
  2. To open the Services window, type “services.msc” and press OK.

    services.msc
    services.msc
  3. Scroll down and look for the Print Spooler service.
  4. When you find it, right-click on it and select Properties from the context menu.

    print spooler service
     Print spooler service
  5. Select Automatic under the “Startup type” section on the properties page, and then click the Start button.

    print spooler properties
     print spooler properties

Next, restart your computer to see whether the issue code 0xc4eb827f has been resolved.

If you are still unable to remove this error from your printer after using all of the options listed above, it is probable that your HP printer is experiencing a significant Hardware issue. And, in order to tackle those challenges effectively, you’d need the assistance of a technical professional. 

You can also contact HP Support. Their customer service is always there to assist you in resolving difficulties that arise as a result of the HP itself. We hope our solutions and advice for HP printer error code 0xC4EB827F are useful to you. 

The post How to Fix “Error Code 0xC4EB827F” on HP Printers? appeared first on Appuals.

]]>
https://appuals.com/hp-printer-error-0xc4eb827f-windows/feed/ 0
How to Fix “Error: UnsupportedProtocol” PCL XL Error on a Printer? https://appuals.com/pcl-xl-error-printer-unsupportedprotocol/?utm_source=rss&utm_medium=rss&utm_campaign=pcl-xl-error-printer-unsupportedprotocol https://appuals.com/pcl-xl-error-printer-unsupportedprotocol/#respond Sun, 02 Jan 2022 17:17:41 +0000 https://appuals.com/?p=230489 One of the oldest printer errors that are still haunting many modern printers is the PCL XL error. The issue is reported on nearly all major desktop operating systems like Windows, Linux, MAC, etc. Many times, the issue is reported after a driver or OS update, mainly on a shared printer. Usually, the following type …

The post How to Fix “Error: UnsupportedProtocol” PCL XL Error on a Printer? appeared first on Appuals.

]]>
One of the oldest printer errors that are still haunting many modern printers is the PCL XL error. The issue is reported on nearly all major desktop operating systems like Windows, Linux, MAC, etc. Many times, the issue is reported after a driver or OS update, mainly on a shared printer. Usually, the following type of message is shown:

PCL XL Error

You may get a PCL XL error on the printer mainly due to characters in the print data stream that the printer cannot “understand” and these characters are mainly caused by the following:

  • Mismatching Font Between the System and Printer: If a font on the system cannot be properly parsed by the printer, then it may result in the PCL XL error.
  • Interference from Conflicting Applications: If the antivirus of your system or another application (like print management suite) is interfering with the print data stream, making its characters untranslatable by the printer, then the printer may show the PCL XL issue.
  • Outdated or Corrupt Printer Driver: If the printer’s driver is outdated or corrupt, then its incompatibility with other printing modules may produce a print job that cannot be properly rendered on the printer, resulting in the issue at hand.
  • Corrupt User Profile: If the user profile is corrupt, then this corruption may lead to non-parse-able characters in the print task, causing the PCL XL error.

Restart the Print Spooler Service

If the Print Spooler service is stuck in the operation, then it may cause the PCL XL error under discussion. Here, restarting the Print Spooler service may solve the problem.

  1. Click Windows, search for Services, right-click on it, and select Run as Administrator.

    Open Services as Administrator
  2. Now click Yes (if UAC prompt is received) and right-click on the Print Spooler service.

    Restart the Print Spooler Service
  3. Then click on Restart and once restarted, check if the printer’s PCL XL problem is solved.

Perform a Cold Restart

A temporary communication glitch between the system and printer might cause the PCL XL error at hand. Here, performing a cold restart of the system, networking equipment, and problematic printer may solve the problem.

  1. Power off the system, printer, and networking equipment (routers, extenders, etc.).
  2. Now, unplug the power cable of all these devices and wait for 5 minutes.

    Unplug Router from the Power Source
  3. Afterward, plug back the devices and power on the router.
  4. Now let its lights stabilize and afterward, boot the system.
  5. Once booted, power on the printer and wait till it is fully powered on.
  6. Now check if the printer is working fine.

If that did not work, check if the printer works fine with another system. If so, then check if the issue is only caused by a particular file. If this is the case, then check if the problematic file can be printed from another system. If not, then check the file for any issues.

Update the Printer’s Drivers to the Latest Build

If the printer’s driver is outdated, it may have become incompatible with the other modules in the process. In such a case, you can fix a PCL XL error by updating the printer’s drivers to the latest build.

  1. Firstly, make sure the system’s Windows and device drivers are updated to the latest build.
  2. Now check if the printer is working fine.
  3. If not, open the OEM’s website in a web browser (like HP.com) and check if an update for the printer driver is available.
  4. If so, then download and install the updated driver (without uninstalling the older one).
  5. Now restart your system and upon restart, check if the printer is clear of the PCL XL error.

Update the Printer’s Firmware to the Latest Build

Incompatibility between the outdated printer’s firmware and other printing modules may cause the PCL XL issue. Here, updating the printer’s firmware to the latest build may solve the problem. A printer’s firmware can be updated by many methods like an app, through a system connected via a USB to the printer, or from the printer itself. For illustration, we will discuss the process for an HP printer.

  1. Firstly, make sure the printer is connected to the Internet (either through ethernet or Wi-Fi).
  2. Now, on the printer’s screen, open Settings and select Preferences.
  3. Then open Tools (or Print Management) and select Web Services (or Printer Update or LaserJet Update).
  4. Now follow the prompts on the printer’s screen to update the printer’s firmware and afterwards, check if the printer is working fine.

    Update the Printer Firmware

Run the OEM Printer Troubleshoot Utility

Many OEMs have released utilities (like Microsoft’s Printer Troubleshooter or HP’s Print and Scan Doctor) to troubleshoot the common problems with a printer and running these utilities may fix the current PCL XL error.

Use the Microsoft Printer Troubleshooter

  1. Right-click Windows and select Settings.

    Open Windows Settings
  2. Now open Update & Security and head to the Troubleshoot tab (in the left pane).

    Open Update & Security
  3. Then, in the right pane, open Additional Troubleshooter, and afterward, click to expand the Printer option.

    Open Additional Troubleshooters
  4. Now click on Run the Troubleshooter and wait till the troubleshooter completes its operation.

    Run the Printer Troubleshooter
  5. Once done, apply the changes suggested by the troubleshooter, and afterward, check if the printer’s PCL XL issue is resolved.

Use the Printer’s OEM Utility

If using the OS printer utility did not work for you, then using the printer’s OEM utility may solve the problem. For illustration, we will discuss the process for the HP Print and Scan Doctor utility. You may follow the instructions as per the printer’s OEM utility.

  1. Open a web browser and navigate to the Tools page of HP’s website.
  2. Now download the HP’s Print and Scan Doctor as per the OS.

    Download HP Print and Scan Doctor
  3. Then launch the downloaded utility as administrator and select the problematic printer.
  4. Now click on Fix Printing and wait till the result is shown.

    Fix Printing by Using the HP Print and Scan Doctor
  5. Afterward, check if the printer is operating fine.

Clean Boot Your System and Disable/Uninstall Conflicting Applications

If an application on your PC (like Papercut or Gugenprint) is interfering with the routine operation of the printing modules of the system, then the printer might show the PCL XL error at hand. Here, clean booting the system and disabling or uninstalling these conflicting applications may solve the problem.

  1. Clean boot your PCs (host and client) and check if the printer is working fine.
  2. If so, then enable back the processes/services/applications one by one that was disabled during the clean boot process to find out the problematic one.
  3. Once found, either you keep it disabled or uninstall it.

The PaperCut Print server is reported to cause the issue. In the case of an Apple machine, the Gugenprint driver is reported to cause the issue. If you have any of these applications on your system, then make sure to check if these are not causing the issue.

Disable PaperCut Print Services

Disable Render Print Jobs on Client Computers

As the print jobs are rendered on the client computers, the printer may fail to properly handle the rendered output by the client, resulting in the PCL XL error at hand. In such a case, disabling the rendering of the print jobs on the client computers may solve the problem.

  1. On the host/server computer, click Windows, type Print Management, right-click on it, and select Run as Administrator.
  2. Now, right-click on the problematic printer (you may have to expand the Print Servers or Deployed Printers option) and select Properties.

    Open Properties of the Printer in Print Management
  3. Then head to the Sharing tab and uncheck the option of Render Print Jobs on Client Computers.

    Uncheck Render Print Jobs on Client Computers
  4. Now apply your changes and afterward, check if the PCL XL error is cleared.

Edit the Font-Related Printer Settings

As the PCL XL error is caused by mismatching characters in the print data stream, these characters can be caused by a font not supported by the printer. In this context, editing the font-related printer settings may solve the problem.

  1. Right-click Windows and open Settings.
  2. Now select Devices and head to the Printers and Scanners tab.
  3. Then, in the right pane, expand the problematic printer and click on Manage.

    Open Manage of the Printer
  4. Now open Printing Preferences and head to its Advanced tab.
  5. Then expand the dropdown of TrueType Font and select Download as Softfont.

    Set True Type Font to Download as Softfont
  6. Now apply your changes and check if the PCL XL problem is solved.
  7. If not, again head to the Advanced tab of the printer’s Preferences and set the dropdown of Send True Type as Bitmap to Enabled.

    Set True Type as Bitmap to Enabled
  8. Then apply your changes and afterward, check if the PCL XL printing error is cleared.
  9. If that did not work, once again, head to the Advanced tab of the printer’s Preferences and set the dropdown of the Print Data Optimization to Optimize for Text and Vector.

    Set Print Data Optimization to Optimize for Text and Vectors
  10. Now apply your changes and check if the printing PCL XL error is cleared.

If the issue persists, check if setting the Send as Image when printing the file solves the problem. If that is not working, check if printing to a file and then printing that file through the printer clears out the issue.

Reset the Printer to the Factory Defaults

The printer may show the PCL XL error due to a misconfiguration of the printer or if the printer’s firmware is corrupt. In such a case, resetting the printer to the factory defaults may solve the problem. For elucidation, we will discuss the process of resetting an HP printer to the defaults through the printer screen.

  1. Launch the Setup on the Printer screen and open Tools.

    Open Printer Setup
  2. Now select Restore Factory Defaults and click on Yes.

    Open Tools on the Printer Setup
  3. Once the printer’s reset operation is complete, set it up again and connect it to the problematic system.

    Restore Printer to the Factory Defaults
  4. Now check if the printer’s PCL XL problem is solved.

Rename the Printer File in the Print Spooler Directory

If the printer file name in the Print Spooler directory cannot properly indicate the proper printer language to be used, then the printer may throw the PCL XL error. In such a case, renaming the relevant file in the Print Spooler directory (that will force the OS to re-create the file on the system start with proper settings) may solve the problem.

  1. Right-click Windows and select Run.

    Open the Run Command Box from the Quick Access Menu
  2. Now navigate to the following path:
    \Windows\System32\spool\drivers\x64\3

    Navigate to the Drivers Folder of the Spool Directory
  3. Then right-click on the file related to the problematic printer with a .gpd extension and rename it (e.g., 123.gpd).

    Rename the Printer GPD File in the Spool Directory
  4. Now restart your system and upon restart, check if the PCL XL issue is resolved.

Edit the Device Settings to Use the PCL 5 or KPDL Driver

If you are using a driver that is not compatible with the printer (like PCL 6 or postscript), then check if setting up the device to use a PCL 5 or KPDL driver solves the problem.

  1. Launch the printer management utility like FindMe Print and head to its Device Settings tab.
  2. Now click on PDL and in the resulting menu, expand the dropdown of the available languages.
  3. Then select PCL 5c (or PCL 5e) and apply the changes.

    Set Available Languages in the Device Settings of Printer to PCL 5c
  4. Now restart your system and upon restart, check if the PCL XL printing issue is resolved.
  5. If that did not work or was not an option, check if setting the available languages dropdown to KDPL solves the problem.

Disable the Antivirus or Firewall of Your System

The printer’s PCL XL issue could be a result of interference from the security product (AVG antivirus is a reported culprit to cause the issue) of the system and disabling the same may solve the problem.

Warning:

Proceed at your own risk as disabling the security software of your system may expose the system, network, or data to threats.

  1. Expand the hidden icons of the system tray and right-click on the security product.
  2. Now select Pause Protection and if the UAC prompt is shown, click Yes.

    Pause Protection of ESET Internet Security
  3. Then confirm to disable the antivirus and again, right-click on the security product in the system’s tray.
  4. Now select Pause Firewall and afterward, confirm to disable the Firewall.

    Pause Eset Firewall of Your System
  5. Once disabled, check if the printer’s PCL XL error is cleared.

If so, you may add an exception for the printer’s related modules in the antivirus/firewall settings.

Reinstall the Printer Driver

The printer may show the PCL XL error if the installation of the printer driver is corrupt and reinstalling the same may solve the problem.

  1. Firstly, make sure the printer is not connected to the system with a USB cable.
  2. Then, right-click Windows and select Apps & Features.
  3. Now expand the OEM driver utility (like HP Basic Driver Software, HP Smart, etc.) and click on Uninstall.

    Uninstall All the Printer Applications from Apps
  4. Now follow the prompts on the screen to uninstall the utility and then repeat the same to uninstall all the printer-related utilities from Apps & Features.
  5. Afterward, restart your system and upon restart, right-click Windows and select Settings.
  6. Now open Devices and in the resulting window, head to the Printers & Scanners tab.
  7. Then expand the problematic printer (if shown) and click on the Remove Device button.

    Remove the Canon Printer in Printers and Scanners
  8. Now confirm to remove the printer and right-click on Windows.
  9. Then select Device Manager and expand View.
  10. Now select Show Hidden Devices and expand the Printers option.

    Show Hidden Devices in Device Manager
  11. Then right-click on the problematic printer and select Uninstall Device.
  12. Now checkmark the checkbox of Delete the Driver Software of This Device and click on Uninstall.

    Uninstall the Printer from the Device Manager and Delete its Driver
  13. Then wait till the printer device is uninstalled from the Device Manager and afterward, repeat the same to uninstall all the devices related to the problematic printer.
  14. Now click Windows, search for Print Management, right-click on it, and select Run as Administrator.

    Open Print Management
  15. Then right-click on the problematic printer (you may have to expand the Print Server or Deployed Printers option) and select Delete.

    Delete the Printer in the Print Management
  16. Now confirm to delete the printer from the Print Management and restart your system.
  17. Upon restart, download the printer driver from the OEM website (like HP.com) and install the driver as administrator.
  18. Once installed, restart your system, and upon restart, check if the printer PCL XL issue is resolved.
  19. If not, check if uninstalling the current driver (as discussed above) and installing a PCL 5, post-script, or Type 3 driver solves the problem.
  20. If the issue persists, check if reinstalling the printer driver in compatibility mode solves the problem.
  21. If that did not work, check if using a universal driver (like HP UPD driver) solves the issue.

Try Another User Profile

The PCL XL issue could be the result of a corrupt user profile or insufficient printer permissions (due to a glitch) to the user. In such a case, creating a new user profile and printing through that profile may solve the problem.

  1. Create a new user account on your system and configure it to use the printer.
  2. Now try to print a document through the new user profile and hopefully, the printer is working fine.

If none of the above did the trick for you, then check if setting up the printer locally through an IP port (bypassing the print server) solves the problem. If that did not work, check if upgrading the printer RAM solves the problem.

The post How to Fix “Error: UnsupportedProtocol” PCL XL Error on a Printer? appeared first on Appuals.

]]>
https://appuals.com/pcl-xl-error-printer-unsupportedprotocol/feed/ 0
Canon Printer in Error State? Try These Fixes https://appuals.com/canon-printer-in-error-state/?utm_source=rss&utm_medium=rss&utm_campaign=canon-printer-in-error-state https://appuals.com/canon-printer-in-error-state/#respond Sat, 25 Dec 2021 22:38:30 +0000 https://appuals.com/?p=230063 Canon printers being in an error state is a very common problem. The error is notified to the user as a system notification or on the printer screen. The error state issue is reported on nearly all the models of the Canon printers (network or local). For some of the users, the issue started to …

The post Canon Printer in Error State? Try These Fixes appeared first on Appuals.

]]>
Canon printers being in an error state is a very common problem. The error is notified to the user as a system notification or on the printer screen. The error state issue is reported on nearly all the models of the Canon printers (network or local). For some of the users, the issue started to occur after the printer cartridge or toner was replaced, while for another set of users, the error state issue occurred after the router was changed. In some cases, the problem occurred only after printing the first page of the print job while in some, it occurred out of blue. Also, some users reported that no lights on the printer were blinking when the issue started.

Canon Printer in Error State? Try These Fixes
Canon Printer in Error State Fix

A Canon printer might say it is in an error state mainly due to the following:

  • Interference from Firewall or Antivirus: If a security product of your system is hindering the printer’s driver access to an essential system resource (like print spooler), then it may cause the error state issue.
  • Corrupt or Incompatible Router Firmware: If the router’s firmware is corrupt or the router was recently changed, then the printer and system may fail to communicate with each other, resulting in the printer issue at hand.
  • Corrupt Installation of the Canon Printer Driver: If the Canon printer’s driver has become corrupt (e.g., due to a sudden power failure), then the printer might show the error state issue.
  • Hardware Issue: The issue under discussion could be a result of a hardware problem with the printer e.g. if the LAN or Wi-Fi modules of the printer have gone bad, then the printer may fail to communicate with the system and cause the error state message.

Perform a Cold Restart of the Printer, Router, and System

A temporary communication glitch between the printer and system may result in the printer error state issue. Here, performing a cold restart of the printer, router, and system may clear the glitch and thus solve the problem.

But before moving to that route, check if any lights are blinking on the printer. If so, check the Canon website to understand the lighting pattern and troubleshoot accordingly e.g., if the B and C lights on the printer are full-on but not blinking, then you may have to replace the print cartridges.

  1. Power off your system, router, and printer.
  2. Now, unplug the power cable of all the devices and disconnect all the devices from each other.
  3. Then remove the network cables from the back of the router and PC.
  4. Now wait for 5 minutes and in the meantime, check if the printer is clear of any debris or jammed paper. Also, make sure all the printer parts (including cartridges or toners) are properly connected.
  5. Afterward, connect back all the power and network cables to the devices.
  6. Then power on the router and let it stabilize.
  7. Now power on the printer and once it is properly powered on.
  8. Then power on the problematic system and once powered on, check if the printer is clear of the error state.
  9. If not, then power on the printer, and afterward, check if unplugging/plugging back the LAN cable solves the problem.
  10. If that did not work, right-click Windows and open Settings.

    Open Windows Settings
  11. Now select Devices and head to the Printers and Scanners tab.

    Open Devices in Windows Settings
  12. Then check if there is a copy of the Canon printer is shown e.g., Canon mg2500 (copy 1).

    Use the Copy of the Canon Printer in Devices
  13. If so, then check if printing through that printer copy solves the problem.

If that did not work, then check if the printer can be used by directly connecting it to the problematic system by using a USB cable. If not, check if the printer works fine on another system (either through the network or USB).

Disable the Firewall/Antivirus of the System

You may encounter the error state issue on a Canon printer if the firewall/antivirus of your system is blocking access to a module essential for the printer application/driver operation. In this scenario, you can get the Canon printer out of the error state by disabling the firewall of the system.

Warning:

Proceed at your own risk as disabling the firewall of your system may expose your system, network, or data to threats.

  1. Right-click on the security software (e.g., ESET) in the system’s tray (you may have to expand hidden icons) and select Pause Protection.

    Pause Protection of ESET Internet Security
  2. Then confirm to disable the protection and again, right-click on the security product.
  3. Now select Pause Firewall and then confirm to disable the system’s firewall.

    Pause Eset Firewall of Your System
  4. Then make sure to disable the Windows Defender firewall as well.
  5. Now check if the Canon Printer is working fine.
  6. If not, make sure the Spooler SubSystem App is not listed as a blocked program in the security application settings (Norton is reported to block the mentioned utility). If so, then add an exception for the following path in the security software settings:
    C:\Windows\System32\spoolsv.exe

Reset the Router to the Factory Defaults

The system might fail to query the printer if the router’s firmware is corrupt and this may lead to the error state message at hand. Also, if the router was recently changed, then the printer may fail to properly communicate with the system. In such a case, resetting the router to the factory defaults may solve the problem.

  1. Firstly, backup the essential information to set up the router later on and make sure the router is powered on.
  2. Now locate the reset button on the router, usually, at the back or bottom of the router. In some routers, the power button acts as the reset button if pressed for a longer time.
  3. Once located, press/hold the reset button by using a pointy object (like a paperclip) and wait for 30 seconds.

    Reset Your Router
  4. Then release the reset button and let the router power back on.
  5. Now configure the router as per the OEM instructions.
  6. Afterward, configure the printer and system to check if the Canon printer error state issue is resolved.

Reinstall the Canon Printer Software/Driver

If the installation of the Canon printer driver/software is corrupt, then you may encounter the error state message. In this context, reinstalling the printer application/driver may solve the problem. But before that, make sure there is no time interval set up on the system or printer (e.g., if an organization printer is configured only to print during office times).

  1. Firstly, disconnect the printer from the system (if connected through a USB).
  2. Now right-click on Windows and select Apps & Features.
  3. Then uninstall all the Canon applications (driver, Canon IJ Network Tool, etc.). Make sure to remove the MP drivers, XPS drivers, Extended Survey Program (if installed) as well.

    Uninstall the Canon Applications in the Windows Settings
  4. Afterward, right-click on Windows and select Settings.
  5. Now open Devices and in the left pane, head to the Printers and Scanners tab.
  6. Then select any of the Canon printers and click on Remove Device.

    Remove the Canon Printer in Printers and Scanners
  7. Now confirm to remove the printer and repeat the same for all the Canon printers.
  8. Again, right-click on Windows and select Device Manager.
  9. Now, on the menu bar, expand View and select Show Hidden Devices.

    Show Hidden Devices in Device Manager
  10. Then expand Printers and right-click on the Canon printer.
  11. Now select Uninstall Device and then checkmark the option of Delete the Driver Software for This Device.

    Remove the Canon Printers in the Device Manager
  12. Then, click on the Uninstall button, and once done, repeat the same for other Canon printers in the Device Manager (if present). In case, the printer also has a scanner functionality, make sure to remove it under the Imaging Devices option of the Device Manager.
  13. Now restart your system and upon restart, download the latest driver of the Canon printer from the regional Canon website.
  14. Then launch the downloaded Canon driver as administrator and follow the prompts to install the driver.
  15. Once installed, restart your system, and upon restart, check if the Canon printer’s error state issue is resolved.

Re-Add the Wi-Fi Network to the Printer

The printer in error state problem could be a result of an issue with the network type it is using e.g. if a Wi-Fi connection is being used and the printer’s Wi-Fi card (or vice versa) has gone bad, then it may result in the error at hand. Here, using the other network type may solve the problem.

Firstly, if you are using a Wi-Fi connection, then check if using a LAN connection to the printer solves the problem. If that is not an option, then you may add the Wi-Fi network to the printer as discussed below (the exact instructions might differ for some users but general guidelines will be the same). But before doing that, make sure the printer can print a test page.

  1. On the Home screen of the printer (e.g., PIXMA MG6320), swipe left and tap on the Setup icon (the wrench and screwdriver icon).
  2. Now select Device Settings and tap on LAN Settings.

    Open Wireless LAN Setup of the Canon Printer
  3. Then open Wireless LAN Setup and on the To Startup Setup… window (if shown), select To Other Connection Methods (near the bottom of the screen).
  4. Now tap on Standard Setup and select your Wi-Fi connection from the list of the available networks.
  5. Then enter the Wi-Fi credentials and apply the changes.
  6. Then, on the problematic system, reinstall the driver/printer application (as discussed earlier) and hopefully, the printer would be out of the error state.

If the issue persists, then you may have to contact the regional support of Canon to solve the problem.

The post Canon Printer in Error State? Try These Fixes appeared first on Appuals.

]]>
https://appuals.com/canon-printer-in-error-state/feed/ 0
Fix HP Printer Displaying Error 0XD8077900 https://appuals.com/hp-printer-error-0xd8077900/?utm_source=rss&utm_medium=rss&utm_campaign=hp-printer-error-0xd8077900 https://appuals.com/hp-printer-error-0xd8077900/#respond Fri, 02 Jul 2021 14:18:27 +0000 https://appuals.com/?p=207485 Error Code 0XD8077900 (KERNEL_EXEC_ST) error on HP Printers occurs when attempting to initiate a printing job on their HP Printer but the printer doesn’t respond back. This issue seems to be restricted to HP Envy, DeskJet Ink Advantage, OfficeJet, and All-in-One 5xxx models. After investigating this particular issue extensively, it turns out that there are …

The post Fix HP Printer Displaying Error 0XD8077900 appeared first on Appuals.

]]>
Error Code 0XD8077900 (KERNEL_EXEC_ST) error on HP Printers occurs when attempting to initiate a printing job on their HP Printer but the printer doesn’t respond back. This issue seems to be restricted to HP Envy, DeskJet Ink Advantage, OfficeJet, and All-in-One 5xxx models.

HP Printer Error 0XD8077900

After investigating this particular issue extensively, it turns out that there are several different underlying causes that might end up triggering this error code when initiating a printing job on an HP printer. Here’s a list of the most likely culprits:

  • IPv6 conflict – As it turns out, one of the most common situations that will cause this error is a protocol conflict caused by IPv6. Some uses dealing with the same issue have confirmed that they were able to get the issue fixed by temporarily disabling IPv6 prior to initiating a new printing job.
  • Firmware glitch – In certain scenarios, you’ll see this error when a native new HP firmware is available on your printer glitches out and refuses to take on new printer jobs. In this case, a power cycle operation should fix the issue automatically in the vast majority of cases.
  • Outdated printer firmware – If your printer refusing to take on any new printing jobs because it’s waiting to install a critical firmware update, you will have to download and install the mandatory update before it can resume the active printing jobs. You can do this manually or you can do it automatically if your HP printer supports it.
  • Underlying hardware issue – Under certain circumstances, you can expect this problem to occur due to some type of hardware problem that you cannot resolve by yourself. In this case, you should get in touch with an HP Live agent and ask for assistance in getting your printer fixed (or sending it for repairs if you’re dealing with a hardware issue)

Now that you are familiar with every potential culprit that is known to cause this issue, here’s a list of verified fixes that other affected users have successfully used to fix the 0XD8077900 error code:

1. Disable IPv6

If your printer is connected to the computer giving the printing instructions over the internet, chances are you’re seeing this error due to a network inconsistency facilitated by IPv6. This is even more likely if the computer giving the instructions is running on Windows 10.

Several affected users dealing with the same kind of issue have confirmed that they finally managed to fix the issue by accessing the Advanced Network settings related to the active home/work network and disabling IPv6.

Note: Disabling IPv6 might interfere with certain applications that run exclusively on this newer protocol, so consider only making this change temporarily (only until you manage to complete your printing queue).

If you haven’t tried resolving the 0XD8077900 error by turning off IPv6, follow the instructions below to learn how to do so:

  1. Press Windows key + R to open up a Run dialog box. Next, type ‘ncpa.cpl’ inside the text box and press Enter to open up the Network Connections tab. If you see the UAC (User Account Control) prompt, click Yes to grant admin access.

    Opening the Network Connections tab
  2. Once you’re inside the Network Connections tab, right-click on the network that is currently active and choose Properties from the context menu.

    Accessing the Properties menu
  3. Once you’re inside the Properties menu, access the Networking tab, go under The connection uses the following items and uncheck the box associated with Internet Protocol Version 6 (TCP / IPv6).

    Disabling IPv6
  4. Click Ok to save the changes, then reboot your computer and see if the printing job now completes successfully.

If you’re still seeing the same 0XD8077900 error code when you attempt to print something with your HP 5xxx model, move down to the next potential fix below.

2. Reset your printer

If you used the method above to ensure that the problem is not being caused by a badly maintained IPv6 connection, chances are this problem is occurring due to a glitch with your printer.

In this case, you should do is reset the entire printing mechanism – The procedure of doing so is pretty much universal and will be applicable to any HP printer model you might be using (LaserJet, OfficeJet, DeskJet, Envy or All-in-One).

NOTE: This operation will not expose you to the risk of damaging your printing device. It’s really the equivalent of doing a factory reset on other devices. If the problem is related to a firmware glitch, the procedure below should be able to resolve it swiftly.

Follow the instructions below to successfully reset your HP printer device:

  1. Ensure that your printer is fully turned on and in idle mode (no job currently active).
    Note: If you can still hear noises coming from your printer, don’t move forward! Wait patiently until the machine becomes silent before moving down to the next step below.
  2. Once you’ve ensured that no active job is being processed, go ahead and disconnect the power code from the rear of your printer. After you do this, ensure that you’ve also removed the power cord from the wall outlet.

    Unplugging your printer
  3. After you unplug the cord, wait for at least 60 seconds before plugging the cord back in in order to ensure that the power capacitors are completely drained.
  4. Finally, reconnect the power cord, start your printer conventionally and wait for the initial internal checks to complete.
  5. Once the warm-up period is finished, initiate another printing job, and see if the problem is now fixed.

In case you are still seeing the same error code 0XD8077900 after the print job fails, move down to the next potential fix below.

3. Update HP Printer Firmware

According to some affected users, the KERNEL_EXEC_ST (0XD8077900) error can also appear due to the fact that your printer is using a deprecated firmware version that inhibits it from communicating with your Windows computer over the local network.

Fortunately, HP regularly releases new printer versions aimed at fixing these types of bugs and glitches, so chances are the fix, in this case, is as simple as installing the latest firmware version available for your particular HP printer model.

If your HP printer supports Web Services, you should be able to install the pending update directly from your printer menu:

  1. If you have a printer with the ePrint button or icon touch, press the HP ePrint icon, then access the Setup (Settings menu).
  2. Next, look for a setup entry named Product Update or Check Product Updates.

    Updating the printer

    Note: If you have an HP printer with a text-based menu, access the Setup > Settings > Service. Next, access the Preferences > Printer Maintenance > Tools menu, then choose Web Services > Printer Update >  Update. 

  3. If you see the Terms of Service or sign in with your account, follow the instructions and enable Web Services if required.
  4. Wait until the update procedure is complete, then reboot your printer manually and see if the 0XD8077900 error stops occurring.

If you are experiencing the KERNEL-EXEC-ST error with an older printer error, follow the instructions below to manually download & install the latest firmware update from the HP Customer support download page:

  1. First things first make sure that your printer is connected to your local network (via ethernet or USB cable).
  2. Next, open up the HP Customer Support Download Page and click on Let’s identify your product to get started.
  3. Next, click on Printer and follow the on-screen instructions to identify the latest firmware update for your printer

    Accessing the Printer category on the download page
  4. When you’re prompted to select your printer model do so, then click on Submit and select the operating system (Windows or macOS).
  5. Next, click on Firmware before clicking on Download.
  6. Wait for the download to finish, then open it to start the firmware updating process.
  7. Once you find yourself inside the installation window, follow the on-screen instructions to complete the installation of the latest printer firmware.

    Downloading the latest printer firmware
  8. After the installation is complete restart both your computer and your printer, then see if the problem is resolved.

Contact HP Support

If none of the potential fixes above have worked for you, the only thing you can do at this point is to get in contact with HP support.

We found several users that went this route and reported that a tech agent successfully troubleshoots the issue for them remotely.

Important: This will only work for you as long as the issue is not hardware-related.

Note: According to other users who interacted with a live agent, HP support is fairly responsive as you can expect to reach a live agent without much trouble. They’ll offer support over the phone through a series of troubleshooting steps and if the problem still persists, you’ll be asked to send the device in for repairs.

Here’s a quick guide on getting in touch with an HP live agent:

  1. Open up your favorite browser and visit the official support page of HP.
  2. From the list of available options, click on Printer at the top of the page.

    Accessing the Printer category
  3. Once you get to the next screen, enter your printer serial number inside the Serial Number box and click on Submit.
  4. Once you identify your HP printer model, you can advance to the menu by navigating through HP Contact Forms > Get phone number.
  5. Use the recommended phone number to get in contact with an HP technician, then follow through with the recommended troubleshooting steps.

The post Fix HP Printer Displaying Error 0XD8077900 appeared first on Appuals.

]]>
https://appuals.com/hp-printer-error-0xd8077900/feed/ 0