What is AMDRSServ.exe?

AMDRSServ.exe is a valid Windows process, a component of the AMD Radeon software that operates the Radeon ReLive feature. This feature enables users to record and stream their gameplay. The file is typically found in the C:/Program Files/AMD/Cnext/Cnext folder. While AMDRSServ.exe is not vital for running Windows, it is necessary for the functionality of Radeon ReLive.

If this executable has issues and you’ve enabled Radeon’s ReLive feature, a system error may occur. This error primarily results from corrupt GPU drivers, or potential system malware infections.

To help you resolve this issue, we’ve created this guide to provide you with the quickest and simplest solutions to resolve this error.

1. Reinstall GPU Drivers

Instead of simply downloading new drivers to replace the current ones, it’s recommended to first completely uninstall your current drivers. This will ensure that there’s no conflict between the new and old driver files.

To do so, you can either use Display Driver Uninstaller (DDU) or AMD Cleanup Utility.

Follow these steps to uninstall drivers using the AMD Cleanup Utility:

1. Visit this website and click the download link for the AMD Cleanup Utility file

   

2. After the download completes, double-click the file and select “Yes” to reboot the system into Safe Mode.

   

3. Wait for your system to restart.
4. After your system restarts, press “OK” to remove AMD driver files when prompted.
5. Wait for the driver files to be removed from your system. Keep in mind that your screen may flicker and/or go black momentarily during the removal process. If this happens, don’t be alarmed as it is part of the process.
6. Once the driver files are successfully removed, press “Finish” and then select “Yes” when asked permission for one last system reboot.

After your system reboots, your GPU drivers will be completely wiped. You now need to reinstall fresh drivers; but to do that, you need to know the exact model of your GPU. If you’re unsure what Graphics Card you have installed in your system, follow this guide.

1. Visit this website and use the search bar to search for your exact GPU model.
2. Press the SUBMIT button.
3. Select the operating system that you’re using on your system.
4. Download the latest AMD Software (Adrenalin Edition). 

   

5. Once it’s downloaded, double-click the file to run it. 
6. Select the destination folder and wait for the AMD Software to install.
7. Once it’s installed, it will show you the latest drivers available for your GPU. Download the newest driver and wait for it to install.

   

8. After the drivers have finished installing, restart your computer

After your computer boots up, the error should no longer pop up. But if it does, try the next solution listed in this guide. 

2. Run SFC and DISM Scan

When you perform the SFC and DISM scans, they will thoroughly examine your system and look for any files that are missing or corrupted, such as any Dynamic Link Library (.dll) files. And if any such files are found, they will be replaced automatically from your system’s backup (SFC scan) or from an external source, such as through a Windows update (DISM scan).  

Since the error indicates a missing OpenCl.dll file in your system, running scans can resolve the issue by replacing this file on your computer.

To perform an SFC scan, follow the steps we’ve given below:

1. Press the Windows Key, type Command Prompt, and click on “Run as administrator.”
   

   

2. Type the following command in the Command Prompt Window and press enter:

   sfc /scannow

3. Wait for the SFC scan to be completed.

   

Once the scan is completed, it will display a message that will tell you whether it found and replaced any corrupted/missing files. 

The DISM scan is even more thorough than the SFC scan, so it will be able to find any system irregularities that the SFC scan looked over.

To perform the DISM scan, simply enter the following command into Command Prompt and press enter:

DISM /Online /Cleanup-Image /RestoreHealth

Note: Before performing this scan, make sure that your system has an active internet connection. 

Once the scan is finished, restart your system and check whether the error message appears again.

3. Manually Install the OpenCl.dll File

If the SFC and DISM scans didn’t replace the missing file on your system, you will need to do it manually. The DLL files of your system are stored in the System32 folder. Simply download the missing file and locate it there.

But before you do so, you need to check whether your system is 32-bit or 64-bit. To do so, simply press Windows Key + I together and navigate to System > About. In this menu, check your System Type under Device Specifications. 

After that, follow the steps below to install the OpenCl.dll file manually:

1. Visit this website and download the latest file according to your System Type (32 or 64-bit). 
2. Place the ZIP file into a new folder, then right-click on the file, and select “Extract/Unzip here.”
   

   

3. Right-click on the OpenCl.dll file and select “Cut.”
4. Copy this address and paste it into File Explorer’s address bar:

   C:\Windows\System32

5. Paste the file in this folder.
6. Restart your PC. 

4. Scan Your System for Malware

If the error persists after DLL file installation, likely, malware is infecting your system, blocking access to the file, and thus, causing the recurring error.

To resolve this issue, conduct a malware scan using a reputable antivirus program on your computer. If already installed, open the program’s menu and initiate the malware scan.

We recommend Malwarebytes for a thorough system scan and complete malware elimination. Refer to our guide for detailed instructions on conducting a malware scan with this program.

5. Renaming the AMDRSServ.exe File

If the above solutions have not resolved the AMDRSServ.exe system error, another method you can try is renaming the AMDRSServ.exe file. This can prevent the system from loading the problematic file on startup, which might be a temporary workaround until a more permanent solution is found or an official update is released that addresses the issue. Here’s how to do it:

1. Open File Explorer by pressing Windows Key + E on your keyboard. Navigate to the directory where the AMDRSServ.exe file is located, which is usually:

   C:\Program Files\AMD\CNext\CNext

   

2. Locate the AMDRSServ.exe file. Before proceeding, ensure that no AMD-related programs are running in the background.
3. Right-click on the AMDRSServ.exe file and select Rename from the context menu.
   
4. Change the filename by adding any alphabet or number. For example, you could rename it to FAMDRSServ.exe. This change will prevent the system from recognizing and running the file in its original form.
   
5. Press Enter to save the renamed file.
6. Restart your computer to apply the changes.

After completing these steps, your system will no longer attempt to run the AMDRSServ.exe file on startup, which should prevent the error message from appearing. Keep in mind that this is a workaround and it may disable certain functionalities associated with the AMD Radeon software, such as the Radeon ReLive feature. If an update from AMD becomes available that addresses this error, it is recommended to rename the file back to its original name before applying the update to ensure proper installation and functionality.

Contact AMD Customer Support

If you’ve followed the previous solutions, including renaming the AMDRSServ.exe file (as described in Method 5), and the system error persists, it may be time to seek assistance from AMD Customer Support. Their team has the expertise to provide guidance on complex issues that aren’t resolved through standard troubleshooting steps.

To contact the AMD Customer Support Team, follow the steps below:

1. Visit the AMD Support website. 
2. Select your preferred language and wait for the form to load. 

   

3. Fill out the required information in the form. 
4. Select “Graphics” as your Product Type. 
5. In the Subject box, type “AMDRSServ.exe System Error (OpenCL.dll file missing)” 
6. In the Problem Description box, describe your problem in detail. 
7. Press the Upload Files button and attach a screenshot of the error alert.
8. Complete the reCaptcha and press the Submit button.

Note: In the Problem Description box, you need to provide as much information as you possibly can. Make sure to mention the following points: 

1. The entire error message.
2. When the error started occurring and how often it occurs. 
3. Your system specifications.
4. The changes you made to your system right before the error occurred. 
5. All of the solutions you’ve tried to fix the error. 

Once you’ve submitted the form, the Support Team will send you an email within a day or two with guidance on how to fix the error. If their solution doesn’t resolve the error, make sure to reply to that email and inform them that their solution didn’t work. 

The post How to Fix AMDRSServ.exe System Error in Windows? appeared first on Appuals.

Before diving into the solutions, ensure that your Windows is up to date with all the latest updates installed. This can sometimes resolve compatibility issues that may be causing the GeForce Experience errors.

Many users on forums, such as Reddit, have reported success by performing a clean installation of both GeForce Experience and the NVIDIA drivers. This approach often resolves errors that occur due to corrupt installations or conflicts with previous driver versions.

1. Running GeForce Experience as an Administrator

One common solution to address the “Driver download failed” error in GeForce Experience is to run the GeForce Experience with administrative privileges. This helps ensure that GeForce Experience has the necessary permissions to carry out driver installations. Here’s how to do it:

1. Close GeForce Experience if it’s currently running.
2. Open your computer’s Start Menu and search for “GeForce Experience.”
3. Right-click on the GeForce Experience icon and select “Run as administrator.”

   

4. If prompted by the User Account Control (UAC), click “Yes” to grant administrative privileges.
5. Launch GeForce Experience and check if you can now download and install the driver without encountering any issues.

2. Disabling Your Antivirus Program

The “Driver download failed” error in GeForce Experience can sometimes be triggered by your antivirus software. These security programs are designed to protect your system, but they can occasionally interfere with the normal operation of applications like GeForce Experience. To address this issue, you may need to temporarily disable your antivirus program. Here’s how to do it:

1. First, identify the antivirus software you have installed on your computer. Common examples include Windows Defender, McAfee, Norton, or third-party security suites.
2. Specific instructions may vary depending on your antivirus software:- Windows Defender: To disable Windows Defender, open the “Windows Security” settings. Under “Virus & threat protection,” click “Manage settings” and toggle off “Real-time protection.”- Third-party Antivirus: For other antivirus programs, open the software’s settings or control panel and look for options like “Disable” or “Turn off real-time protection.”
3. With the real-time protection temporarily disabled, launch GeForce Experience and attempt to download and install the drivers again.
4. Once you’ve successfully downloaded and installed the drivers, it’s important to re-enable your antivirus program’s real-time protection to keep your system secure.

3. Manual Driver Installation

If you are unable to download the graphics drivers via the GeForce Experience app, manually installing the drivers can be a reliable alternative. To do this, you’ll need to identify your graphics card model and your Windows operating system version (e.g., Windows 10 or Windows 11). Follow these step-by-step instructions:

1. Open your web browser and go to the official NVIDIA Drivers page by clicking here.
2. On the NVIDIA Drivers page, use the drop-down menus to select your graphics card model under “Product Series” and “Product.” Choose your Windows version under “Operating System.” If you are unsure about your graphics card, visit our guide on how to identify your GPU’s model.

   

3. Click the “Search” button to view the available drivers compatible with your graphics card and Windows version.
4. Then, click the Download button.
5. Once the driver has been downloaded, Run the downloaded driver file and follow the on-screen prompts to complete the installation.
6. After the installation is complete, restart your computer to ensure the changes take effect.

Manually installing graphics drivers ensures that you have the latest driver version tailored to your specific hardware and operating system. This can be a helpful workaround if GeForce Experience encounters difficulties.

4. Reinstalling GeForce Experience

If you’ve encountered the “Driver download failed” error and suspect that your GeForce Experience installation is causing the issue, a fresh reinstallation can often resolve the problem. This is particularly useful when your current installation is corrupted or outdated. Follow these detailed steps to reinstall GeForce Experience:

1. Begin by opening your computer’s Start Menu and searching for “Control Panel.” Open the Control Panel.

   

2. In the Control Panel, click on the “Uninstall a program” option.

   

3. You’ll see a list of installed programs. Locate “GeForce Experience” from the list.

   

4. Double-click on “GeForce Experience” to initiate the uninstallation process.
5. Follow the on-screen instructions to complete the uninstallation. This will remove GeForce Experience from your system.
6. After successful uninstallation, go to the official GeForce Experience website. You can find it by clicking here.
7. Download the latest version of GeForce Experience from the official website.
8. Run the installer and follow the on-screen prompts to install GeForce Experience on your computer.
9. Once the installation is complete, launch GeForce Experience and check if you can now download and install the driver without encountering the error.

5. Clean Installing NVIDIA Drivers

Sometimes, the “Driver download failed” error in GeForce Experience can be attributed to corrupted or problematic graphics drivers.

In such cases, performing a clean install of graphics drivers is a recommended solution to ensure a fresh and error-free installation. Here’s a step-by-step guide on how to do it:

1. Download the Display Driver Uninstaller (DDU) utility from its official website. DDU is a third-party tool that assists in completely removing existing graphics drivers from your system.
2. Once the DDU utility is downloaded, extract the file.
3. Open the folder and run the tool via the Display Driver Uninstaller.exe file.
4. When the DDU utility opens, you’ll be presented with options. Click “Continue” to proceed.

   

5. In the device type menu, select “GPU.”

   

6. In the “Select device” menu, choose “NVIDIA” since we’re dealing with NVIDIA graphics drivers.

   

7. Click “Clean and restart” to initiate the removal process. This action will completely remove your current NVIDIA graphics drivers, ensuring a clean slate for the new installation.

   

8. Once your computer restarts, visit the official NVIDIA Drivers page to download the latest graphics drivers for your specific graphics card model and Windows version.
9. Download the latest drivers and install them.
10. See if the installation proceeds without any issue. 

6. Clean Boot your PC

If none of the previous solutions have resolved the “Driver download failed” error, it’s possible that a third-party program or service is interfering with the driver installation process.

To identify and isolate this interference, you can perform a clean boot, which allows Windows to start with only essential system services running, blocking third-party services and startup applications that may be causing conflicts.

1. Press the Windows key + R on your keyboard to open the Run dialog.
2. Type “msconfig” and press Enter.

   

3. In the System Configuration window, navigate to the “Services” tab.
4. Check the box labeled “Hide all Microsoft services.” This ensures that only third-party services are displayed.

   

5. Click the “Disable all” button to disable all third-party services.
6. Click “Apply” to save the changes and then click “OK.”
7. You’ll be prompted to restart your computer. Click “Restart” to initiate the clean boot.

   

After your PC reboots, it will start with minimal services and applications. This allows you to test if the “Driver download failed” error still occurs. If the problem disappears, it’s likely that a third-party program was causing the interference. You can then enable services and applications one by one to pinpoint the culprit.

These solutions should allow you to get around the driver download failed error in GeForce Experience. In case you are still not able to update to the latest version available, we recommend reaching out to the NVIDIA support team for further guidance regarding the problem. 

The post How to Fix Driver Download Failed Error in GeForce Experience? appeared first on Appuals.

Resizable Bar, or rBAR, is another attempt by NVIDIA that promises to provide additional frames in the games you play. This comes at no additional cost and can be activated with just a few mouse clicks. It may sound too good to be true, but it is indeed real.

What is Resizable Bar? 

You are probably wondering, ‘What exactly is Resizable Bar, and how does it improve the performance of games?’ The answer to these questions is really straightforward. Resizable Bar essentially uses an advanced feature of PCI Express technology that allows for improvement in in-game performance.

When you are playing a game, you move around the game world, forcing the game to load textures and shaders for the new locations. These textures are transferred to the graphics card through the GPU memory or VRAM via many small CPUs. Modern games often have larger assets, which ultimately results in more transfers of the textures to the GPU.

The number of transfers can often have a negative impact on the performance of the game. This is because these transfers queue up and wait for the former to finish before proceeding. With Resizable Bar, you are able to allow the CPU access to the entirety of the GPU frame buffer.

Normally, the processor on your system is limited to accessing only 256MBs of GPU memory. This creates a bottleneck on modern graphics cards that offer a larger size of VRAM. In addition, it also results in a longer wait time for the game assets to arrive via the CPU to the graphics card to be rendered. 

Resizable Bar tackles this problem and instead of only limiting your processor to the mere 256MB of GPU memory, it allows it to access the entire frame buffer. This, as a result, allows the CPU to send in bigger assets quickly since it is able to send in more assets at a time. Thus, by removing this cap from the processor, the performance of games can improve. 

Smart Access Memory: AMD’s Counterpart

While Resizable Bar is from NVIDIA, AMD has been quick to come up with its own name for the same technology, known as Smart Access Memory or SAM. The underlying concept of both remains the same. You will be able to use SAM on AMD graphics cards, while Resizable Bar works for NVIDIA GPUs.

This can give rise to the question, does Resizable Bar work on all NVIDIA graphics cards? To answer this, let us have a more detailed look at the support and compatibility of Resizable Bar. 

Resizable Bar Requirements

As it turns out, you cannot use Resizable Bar on all NVIDIA cards. To be able to take advantage of the Resizable Bar technology, you need to have an RTX 30 series or newer graphics card along with a compatible processor and chipset. 

Intel Support for Resizable Bar

On Intel, the following or newer generations are able to use Resizable Bar. 

Intel Chipsets

Intel CPUs

AMD Support for Resizable Bar

On AMD, the following or newer generations are able to use Resizable Bar. 

AMD Chipsets

AMD CPUs

Resizable Bar Impact on Game Performance

Resizable Bar is a technology that has good potential to improve even further in future. At this current moment, there is a small but visible change in game performances. Technologies like DLSS can often a significantly better improvement in performance than Resizable Bar.

• According to NVIDIA’s official charts, a 12 percent increase in game performance can be achieved with Resizable Bar. 

In addition to that, it is also important to note that Resizable Bar will not impact every game on your computer. This is because not every game is able to support the technology and thus enabling it does not impact the performance of the game. 

How to turn on Resizable Bar?

With all of that out of the way, we can now focus on enabling the feature on your computer. Before proceeding, make sure that you meet the requirements above, i.e. you have a compatible chipset and processor. 

Once you are set there, you can follow the instructions below to enable Resizable Bar. 

1. First of all, you will need to update your BIOS firmware. This is because the feature cannot be accessed on older versions of BIOS and was only made available through updates.
2. To update your BIOS, head to your motherboard manufacturer’s website and download the latest available BIOS. Use the instructions provided by your manufacturer to update your BIOS. 
3. If you are unaware of your motherboard details, press the Win key + R on your keyboard.
4. Type in msinfo32 and hit Enter in the Run box.

   

5. Then, in the System Information window, look for the BaseBoard Manufacturer and BaseBoard Product options. This will reveal your motherboard model and brand.

   

6. After updating your BIOS, restart your computer and boot into your BIOS. 
7. In some cases, you will find an easy Resize Bar option in your BIOS menu to enable Resizable Bar. 
8. Click on the Resize Bar option, if available, to enable it.

   

9. In case you do not have the quick Resize Bar option, you will have to navigate to your PCI Subsystem Settings. This will be located under the Advanced tab. 
10. Then, you will need to enable the Above 4G Decoding and Re-Size BAR Support options. The exact wording can vary slightly depending on your motherboard manufacturer.

    

11. After that, you will need to disable Compatibility Support Module (CSM) in your BIOS as well. 
12. You can find this option under the Boot menu. 
13. Save the settings and exit the BIOS menu. 

With that, you should be able to turn on Resizable Bar on your computer, if supported. 

The post What is Resizable BAR & Should You Enable it? (Guide) appeared first on Appuals.

This simply means that the Windows update utility has detected an update for your graphics driver from its server, which ended up replacing the compatible AMD graphics driver.

AMD Radeon Software needs to communicate with the compatible driver to do various tasks, such as providing access to the latest features, performance reports, driver updates, and more. 

According to the reports, the screen automatically goes black and starts flickering when users encounter this error message. Thus, it is essential to fix this problem as it is related to the graphics driver.

1. Roll back the graphics driver

The simple and basic solution to this issue is to roll back the AMD graphics driver. It is recommended to start troubleshooting by rolling back the graphics driver. When you update the driver, Windows automatically backs up the old driver, which can be installed later if the user experiences issues with the latest driver.

Since Windows has automatically updated the graphics driver, the Roll Back Driver option will be available. To roll back the AMD graphics driver, follow the steps:

1. Right-click the Start Menu button and select Device Manager to open it.
   
2. Now expand the Display adapters and right-click the graphics driver.
3. Select Properties and go to Driver.
   
4. Here click Roll Back Driver.
   
5. Select any reason why you are rolling back. Then, click Yes to install the previous driver.
   
6. If the Roll Back Driver option is disabled, then click Update driver.
   
7. Select Browse my computer for drivers and select Let me pick from a list of available drivers on my computer.
   
8. Tick Show compatible hardware and select the old driver.
   
9. Then, click Next to install the driver. If that does not work for you, move on to the following methods.

2. Download the AMD graphics driver

Since the Windows update has replaced the AMD graphics driver with the incompatible one, you can try downloading the compatible AMD driver from the official site, which could fix this error. To do so, follow the steps:

1. Head to the official AMD site.
2. Select the graphic card and click Submit.
3. Then, select the Operating System and click Download.
   
4. Once the installer is downloaded, simply run it to install the graphics driver.
5. Once done, restart your computer and try launching AMD Radeon Software.

3. Use DDU to reinstall the graphics driver

If the error still persists, then you need to reinstall the graphics driver completely from the system. This can be achieved by using the Display Driver Uninstaller (DDU) application. DDU allows users to remove the drivers with their associated registry files, which ensures a clean uninstallation without any file leftover behind. To use the DDU to reinstall the drivers, follow the steps:

1. Download Display Driver Uninstaller by navigating the website through the link.
2. Once you downloaded it, you will have to extract the folder. For that, you can use WinRar or 7Zip to extract the folder.
   
3. Open the extracted folder, and run the DDU 7Zip file to extract the DDU folder.
   
4. Now navigate to the extracted folder and run the DDU application.
5. Select the Device and the Device type.
6. Then, click Clean and restart.
7. Once done, follow the 2nd method to download the latest driver from the official manufacturer’s suite.

4. Disable Windows MPO

Windows Multiplane Overlay is a part of the display driver, and it is designed to reduce the CPU and GPU load. When this feature was introduced to Radeon Setup Tool, it started causing this error along with several problems, such as flicker or stutter. Therefore, try disabling the MPO feature by following the instructions.

1. Download the Disable MPO registry file through the link.
2. Once it is downloaded, open the registry entry file.
3. Click Run, and click Yes when UAC prompts.
   
4. Click Yes when it says Are you sure you want to continue?
   
5. Once done, restart your computer for the registry changes to take effect.

5. Perform a System Restore

If you are familiar with the System Restore utility, you may have created a restore point that can be used to revert to the previous version of Windows that did not have this issue. System Restore is a utility that saves the system files, drivers, and registry files into a restore point so if anything unusual happens, the user can use the System Restore utility to fix the issues.

To perform a system restore point, follow the steps:

1. Click the Start Menu and type the system restore command rstrui.
   
2. Hit Enter to run the system restore utility.
3. Click Next and select a restore point.
   
4. Again, click Next and click Finish to restore the Windows to a previous state.

That’s it! this will fix your issue. However, if certain settings are not configured correctly you can face this issue again if Windows update replaces the driver. To prevent it from happening again, you have to follow the following method:

Prevent Windows Update from automatically installing the drivers

In this method, we will tell Windows not to update the drivers from it’s database. Follow the steps:

6.1 Disable driver updates through Group Policy Editor

1. Click the Start Menu and type Edit group policy.
   
2. Hit Enter to open the group policy editor.
3. Navigate to the following destination using the left pane.
   Computer Configuration > Administrative Templates > Windows Components > Windows Update > Manage updates offered from Windows Update.
4. In the right pane, double-click the Do not include drivers with Windows update.
   
5. Select Enabled, click Apply and click OK.
   
6. Now your Windows will no longer include drivers in Windows updates. You can now install the latest AMD graphics driver to replace the driver downloaded via the Windows update utility to fix this error.
7. In case the error persists, try disabling driver updates using the registry editor.

6.2 Disable driver updates through Registry Editor

1. Open the Start Menu and type regedit.
2. Press Enter and click Yes when UAC prompts appear to open the registry editor.
   
3. Use the left sidebar to navigate to the following destination.

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\DriverSearching

   

4. Double-click the SearchOrderConfig and change its value data to 0 to dsiable the driver updates.
5. Once done, click OK, close the registry editor, and restart your computer.
   
6. Then, try installing the AMD graphics driver and see if the error is resolved.

In case you want to enable the Windows to update drivers from it’s database again, simply follow the steps mentioned above but this time put Value data to ‘1’ instead of ‘0’.

The post Fix: Windows Update Automatically Replaced AMD Graphics Driver appeared first on Appuals.

However, encountering an issue where you can’t move mouse in NVIDIA Overlay can be pretty frustrating. To deal with this situation, you would need to figure out the potential causes before delving into the troubleshooting methods.

So, whether you’re an avid gamer or a tech enthusiast, this guide will provide you with all the necessary information and effective fixes for the stated issue. In no time, you will regain full control over your mouse within the NVIDIA Overlay. Now, let’s dive right into it!

Reasons Why You Can’t Move Mouse in NVIDIA Overlay

The NVIDIA official webpage attributes the issue of your mouse becoming unresponsive in the NVIDIA Overlay to the EasyAntiCheat update. According to this, games that integrate EasyAntiCheat have been particularly affected by the stated error, including Valorant, Fortnite, etc.

Don’t understand yet? Well, EasyAntiCheat, as the name implies, is an anti-cheat service used in multiplayer games to ensure fair gameplay. Though effective in its intended purpose, some updates may occasionally result in conflicts with other software components like the NVIDIA Overlay.

However, this isn’t the only cause for experiencing mouse unresponsiveness in the overlay. Other reasons may include outdated or incompatible graphics drivers, misconfigured overlay settings, overlapping hotkeys, or a software bug. 

Now that you’re well aware of the potential culprits behind this issue, let’s explore some effective solutions to overcome the situation at hand.

1. Restart Your Game

When trying to fix any software-related issue, your number one approach should be to remove any possible glitches or temporary bugs from within. To do that, you can simply restart your game.

Here’s how to ensure the effectiveness of this method:

1. Prior to quitting your game, save any progress to avoid loss of data.
2. Exit the game from the game menu options or use an appropriate keyboard shortcut (e.g. Alt + F4 for Windows).
3. While you’re at it, quit all background processes related to the game. For that, launch Task Manager, choose the process, and click on End task.

4. Wait for a couple of moments then relaunch the game.
5. Once you’re back in, activate the NVIDIA Overlay and check if the mouse cursor is moving without any issues.

2. Reset In-Game Overlay

When the mouse stops moving within the NVIDIA Overlay, users fail to interact with its features and perform the required functions. In that case, restarting the overlay may refresh its settings and restore normal functionality.

The method essentially involves disabling and re-enabling the in-game Overlay option. This allows the internal processes to refresh and eliminate any temporary glitches responsible for the mouse issue. Below are the steps you need to follow:

1. While in the game, press the keyboard shortcut keys to bring up the overlay. Usually, it’s Alt + Z or Alt + F3, however, it may vary depending on your custom settings.
2. Next, click on the Gear icon to access the overlay Settings.
3. In the General tab, toggle off In-Game Overlay.

4. Wait for some time before re-enabling the option.
5. Now, relaunch the game and check if the issue persists.

3. Enable Borderless Window

Most users who can’t move mouse in NVIDIA Overlay often overcome this issue by exiting the Fullscreen mode and shifting to a borderless window. This allows the game to cover the entire screen of the window without borders and title bars typically associated with the traditional mode. 

While it allows the mouse cursor to move again, it also provides better frame rates, less latency, smoother transitions between applications, and other benefits. Here’s what you must do:

1. First, launch the game and go to its Settings.
2. Next, go to the Video tab and change the Display Mode to Borderless Window.

3. Also, change the Aspect ratio to 4:3 and 5:4 and set the Resolution to 1280 x 980.
4. Lastly, save the changes and go back to NVIDIA Overlay to check if the issue has been resolved.

Note that the steps to make your window borderless may differ for each game.

4. Use Keyboard Shortcuts to Switch Between Programs

The Alt + Tab keyboard shortcut allows you to switch between applications without the use of the mouse. This is especially useful in your case since a stuck mouse cursor prevents you from trying anything else.

This method allows you to switch to another already-open program while the game is still running. Using the shortcut again relaunches the conflicting game and possibly helps restore mouse functionality within the NVIDIA Overlay.

While this method may not always be a permanent fix, it can provide a temporary solution while you explore other ways to tackle the issue.

5. Update or Reinstall NVIDIA Graphics Drivers

Graphics drivers serve as a crucial link between the hardware components of your computer, i.e. the NVIDIA graphics card, and the software applications that rely on them, i.e. the NVIDIA Overlay. 

Hence, the graphics drivers becoming outdated or incompatible with the running program could be one reason why you can’t move mouse in NVIDIA Overlay. For this reason, updating these drivers is an essential step when troubleshooting the stated problem.

Before proceeding, you’ll need to identify the model of your NVIDIA graphics card. This information can be obtained through either the NVIDIA Control Panel or the Device Manager in Windows.

Afterward, Follow the steps below:

1. To begin, head over to the official NVIDIA Drivers webpage to download the latest drivers.
2. Input the necessary details and click on the Search button.
3. Next, click on Download to get the updated driver specific to your card model.

4. Once it’s downloaded, navigate to the location of the file and initiate the installation process.
5. Continue to follow the instructions in the installation wizard to update the driver.

The post Can’t Move Mouse in NVIDIA Overlay? Here’s the Fix! appeared first on Appuals.

This problem is most commonly caused by a DCH driver that throws this error when you try to update it with a standard Nvidia driver package. Other potential causes include a faulty GPU extender, custom BIOS firmware, or driver inconsistency.

Below, you have a list of confirmed fixes that can be deployed to resolve the black screen issue affecting Nvidia driver installations:

1. Replace the Nvidia DCH driver with standard drivers.

If you are using Windows 10 or Windows 11, there is a high likelihood that this issue is caused by the DCH driver.

Note: Numerous user reports confirm that the DCH driver from Nvidia causes significant instability when G-Sync is actively used or when users attempt to employ a variable refresh rate.

Since there’s nothing inherently different between the Nvidia Standard and the Nvidia DCH Display drivers that are packaged with the new universal Windows driver package, you can most likely avoid this issue entirely by replacing the DCH driver with the standard equivalent.

To do this, you will first need to use the DDU (Display Driver Uninstaller) tool to remove every remnant file from the DCH installation, and then install the Standard Nvidia Driver.

Here is a quick guide on how to do this:

1. Open your preferred browser and visit the official download page of the DDU tool.
2. Once you’re inside the correct location, scroll all the way down to the ‘Download Locations‘ menu and use one of the available download mirrors to download the Display Driver Uninstaller package.

   

3. Once the download is complete, extract the contents of the zip file.
4. Next, unplug the internet cable from your PC or disconnect it from the Wi-Fi network.
   Note: This is necessary to prevent your OS from reinstalling the DCH drivers before you complete this procedure.
5. Press Windows key + R to open up the Run box.
6. Type ‘appwiz.cpl‘ and press Ctrl + Shift + Enter to open the Programs and Features menu.

   

7. At the User Account Control (UAC), click Yes to grant admin access. 
8. Inside the Programs and Features menu, click on the Publisher column to arrange all installed programs based on their publisher.
9. Once the list is ordered correctly, scroll down to all the currently installed Nvidia drivers and uninstall everything systematically by right-clicking each item and selecting ‘Uninstall.’

   

   Note: Keep in mind that while you are conducting this procedure, some screen flickering is to be expected. Don’t worry, as this is completely normal.

10. Next, reboot your PC in safe mode to ensure that the Display Driver Uninstaller will run with maximum efficiency. 
11. Once your PC boots in Safe Mode, right-click the main DDU executable and click ‘Run as Administrator.’

    

12. From the UAC (User Account Control) context menu, click on Yes to grant admin access. 
13. At the first DDU screen, select your GPU from the drop-down menu (under Select Device Type). 
14. Next, click on Clean and restart to begin the process of cleaning up your DCH Nvidia driver.

    

15. Once the operation is complete, restart as instructed.
16. At the next startup, reconnect your internet cable or connect to Wi-Fi again, and access the official Nvidia download directory.
17. Scroll down to the NVIDIA Driver Downloads section and select the Product Type, Product Series, Product, Operating System, and Language according to your particular scenario. 

    

    Note: In this directory, you will only find standard Nvidia drivers, so you won’t run the risk of reinstalling the DCH driver.

18. Click the Search button and wait until the list of compatible drivers is generated.

    

    Note: Depending on what you are using your GPU for (gaming or video editing/rendering), select either the NVIDIA Studio Driver or the GeForce Game Ready Driver. Avoid downloading the Beta Release driver, as it is often unstable and may cause additional issues.

19. Click on the driver that you want to download, then click on the associated Download button. 
20. After the driver has been downloaded locally, open it with administrator access and follow the on-screen prompts to install it locally.

2. Replace the GPU extender (if applicable).

If replacing the DCH driver with the standard Nvidia drivers didn’t work in your case and you’re using a GPU extender, there’s a high chance you’re dealing with a hardware issue.

There are many faulty GPU extenders out there, which have now been confirmed to cause this problem intermittently, regardless of your GPU manufacturer.

If you are using a GPU extender, get in contact with the retailer that sold it to you and see if you are eligible to send it back. Chances are, if you bought it from Riser, you can take advantage of the callback program and return it even if your warranty is void.

3. Revert to standard BIOS (if applicable).

If you previously had a custom BIOS installed specifically for your overclocking needs, this is likely the cause of the black screen you are experiencing.

Customized BIOS flashes are known to conflict with new NVIDIA update drivers especially since they changed their packaging method.

If this scenario is applicable, you can fix the issue by reflashing your BIOS with the original BIOS flash provided by your manufacturer.

Important: This operation will vary depending on your motherboard manufacturer. Consult the official documentation before attempting to flash your BIOS. If you have never done this before, leave this task to a certified professional, as you run the risk of bricking your motherboard.

4. Add the NoLockScreen to the registry (if applicable).

If the screen goes black immediately after you reach the initial login screen, where you need to log in with your user account, you might be able to circumvent the issue completely by disabling the lock screen entirely with a minor registry tweak.

Important: Exercise caution while modifying the registry. Inadvertently removing or altering registry values may render your computer unstable. It is recommended that you back up your registry beforehand.

Here is a quick guide on adding the NoLockScreen fix to the Registry Editor to avoid a black screen during every startup:

1. Press the Windows key + R to open up a Run dialog box.
2. Next, type ‘regedit‘ and press Ctrl + Shift + Enter to open the Registry Editor with admin access.

   

3. When you see the User Account Control (UAC), click ‘Yes‘ to grant administrative privileges to the Registry Editor.
4. Inside the Registry Editor, navigate to the following location:

   HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Personalization

   Note: If the Personalization key doesn’t exist, right-click on the Windows key and click on New > Key to create it. 

5. Inside the Personalization key, right-click on an empty space and click on DWORD (32-bit) Value. 

   

6. Rename the newly created DWORD to ‘NoLockScreen’, then double-click on it and set its base to Hexadecimal and its value data to 1. 
7. Click OK to save the changes then restart your PC and see if the issue is now fixed. 

5. Connect to the VGA output (if applicable).

If your GPU has a VGA output and your display is compatible, try connecting your monitor using the VGA output to see if you finally receive a signal.

Chances are, you’ll find that all functions are working properly while you’re connected via VGA.

If this workaround works, simply use the VGA connection until a new driver version is available for your NVIDIA GPU. When a new update becomes available, follow the update instructions and check if the problem is resolved afterward.

The post Fix: Black Screen after Installing Nvidia Graphics Driver in Windows appeared first on Appuals.

The NVIDIA Control Panel gives users the ability to customize their graphics settings according to their preferences. Not only can you improve gaming performance using this tool, but you can also enhance video playback quality and increase the overall performance of your system. 

To help you get the most performance out of your NVIDIA GPU, this guide will show you the best NVIDIA Control Panel settings that will improve the framerate of your games and reduce input lag while maintaining visual quality. 

Before we start, Update your NVIDIA Graphis Drivers

Before we dive into the best NVIDIA Control Panel settings for gaming, you should check whether your GPU drivers are up to date. 

Using the latest GPU drivers is very important, as these new drivers provide better performance in the latest games, and are usually more optimized than older drivers. 

To check whether you are using the latest drivers, follow the steps we’ve listed below:

1. Press the Windows Key to open the Start menu. 
2. Type “GeForce Experience” and press enter.

   

3. Click on the “Driver” option at the top-left corner of the Window.
4. Click on the “Check for Updates” option.  

   

If the Check for Updates option shows no new drivers on the page, it means that you’re already using the latest drivers for your GPU. But if you see a new driver appear, you should download and install it on your system before proceeding to the next section of this guide. 

Best NVIDIA Control Panel Settings for Maximum Performance

Setting	Best Option
Image Scaling	ON (Unless using DLSS)
Ambient Occlusion	OFF
Anisotropic Filtering	OFF
Antialiasing - FXAA	OFF
Antialiasing - Gamma Correction	ON
Antialiasing - Mode	Application-controlled
Antialiasing - Setting	Application-controlled
Antialiasing - Transparency	OFF
Background Application Max Frame Rate	30
CUDA - GPUs	All
DSR - Factors and Smoothness	OFF
Low Latency Mode	ON
Max Frame Rate	User-specific
Multi-Frame Sampled AA (MFAA)	OFF
Monitor Technology	Fixed Refresh Rate for low latency; GSYNC for more smoothness
OpenGL Rendering GPU	Auto-select
Power Management Mode	Prefer Maximum Performance
Shader Cache Size	Driver Default
Texture Filtering - Anisotropic Sample Optimization	ON
Texture Filtering - Negative LOD Bias	Allow
Texture Filtering - Quality	Performance
Trilinear Optimization	ON
Threaded Optimization	ON
Vertical Sync	OFF
Triple Buffering	OFF
Virtual Reality Pre-Rendered Frames	1

To open the Control Panel, simply right-click on an empty space on your desktop and select “NVIDIA Control Panel”. 

If you do not see the Control Panel in the menu, your NVIDIA Display Container service is likely not running. You can easily fix this issue by following this guide. 

Once the panel has opened, you’ll see many different options in the column on the left side of the menu. Below, we’ll be guiding you through all of the settings in each of the three categories: 3D Settings, Display, and Video. 

1. Best 3D Settings

The first option in the 3D Settings category is “Adjust image settings with preview”. This option allows you to quickly adjust the quality-to-performance ratio of the Direct3D and OpenGL applications on your system. 

When you have the “Use my preference” option selected, you can move the slider to the left to increase performance (and decrease quality) or to the right to increase quality (and decrease performance). The 3D model will give you an idea of how much the quality is increasing/decreasing as you move the slider. 

While this is a quick and easy way to improve performance, it is highly inefficient, as it does not allow you to tweak the individual settings to squeeze the most performance out of your GPU. So instead of using the slider, click on the “Use the advanced 3D image settings” option and then click on “Take me there” to view all the settings. 

In the Manage 3D Settings menu, you’ll see a whole list of graphics settings under the “Global Settings” tab that you can tweak according to your preference. The settings in this tab will affect each and every program on your PC. Whereas in the “Program Settings” tab, you can opt to tweak settings for only a specific program.

The list below covers the purpose of each setting in this list and the optimal configuration for achieving an ideal balance between performance and visuals. 

Note: Some settings are not available on certain Graphics Cards, and some are exclusive to PC GPUs only – so laptop users may not see certain settings in their NVIDIA Control Panel application. 

Image Scaling

The Image Scaling setting upscales the resolution of your games by using a complex algorithm. This algorithm analyzes the image on your screen and fills in the missing pixels, making the image appear as if it were rendered at a higher resolution than it actually was. 

So if you are running a game on a resolution that is lower than your monitor’s native resolution (for example, 720p instead of 1080p), Image Scaling will upscale the image to 1080p without sacrificing the framerate of the game.

Image Scaling is similar to the NVIDIA DLSS technology but one advantage it has over DLSS is that it is supported by a lot more NVIDIA GPUs. However, even Image Scaling may not work on certain GPUs. 

If you are playing graphic-intensive games and have a low to medium-end GPU, it is recommended to turn Image Scaling ON. This will allow you to increase the visual quality of your games without sacrificing performance. 

If you are using a high-end GPU, Image Scaling will likely have little to no effect on the visuals and performance of your games. Additionally, if you prefer to see a pixel-perfect image with no artifacts or added effects, it’s best to keep this setting OFF. 

Another thing to keep in mind is that if you are already using DLSS in a game, there’s no point in using Image Scaling. This is because DLSS is already doing the same job, and doing it much better than Image Scaling can.

Ambient Occlusion

The Ambient Occlusion setting is responsible for the lighting of objects in games. When you have this setting turned on, it will make the lighting and shadows of your games much more realistic, but there will be a noticeable effect on the game’s performance. 

If you have a low to medium-end GPU, it is recommended to turn this setting OFF, as it will give you a considerable boost in performance. However, if you want to improve the visuals in the game, set it to Performance to enhance the game’s lighting and shadows without completely tanking your FPS. 

Anisotropic Filtering

Anisotropic Filtering improves the clarity and sharpness of the textures in games. When you play a game at a high resolution, this setting will help eliminate blurriness and distortion in the textures. The more you increase this setting, the sharper the textures will be.

It is recommended to leave this setting turned OFF (or set to a very low value, such as 2x or 4x) in the NVIDIA Control Panel, as most games come with built-in Anisotropic Filtering controls which are much more efficient. Furthermore, this setting has a massive effect on the framerate of games, so leaving it turned on will significantly reduce your FPS.

Antialiasing

There are 5 unique Antialiasing settings in the Control Panel:

1. Antialiasing – FXAA.
2. Antialiasing – Gamma Correction.
3. Antialiasing – Mode.
4. Antialiasing – Transparency.
5. Antialiasing – Setting.

Out of these 5 settings, the ones you actually need to care about are Antialiasing – FXAA and Antialiasing -Setting. 

Both of these settings work to reduce jagged edges in the images displayed on your screen. However, they work in different ways. 

Antialiasing FXAA is a unique Antialiasing technique that eliminates jagged edges while maintaining a minimal effect on performance. However, this setting does not give you much control, as it can only be turned on or off, instead of giving you the option to adjust its intensity.

Antialiasing – Setting, on the other hand, combines different techniques, such as Multisampling and Supersampling. It gives you a range of values to work with, giving you much more control over its intensity. However, it generally has a bigger impact on performance.

It is recommended to turn both of these settings OFF as most modern games come with these settings built-in. It is much more efficient to use the built-in Antialiasing settings of games instead of using these ones. 

That said, if you have a very powerful PC and wish to squeeze the most visuals out of your game, you should turn Antialiasing FXAA on. 

As for Gamma Correction, Mode, and Transparency, Gamma Correction should be turned ON as it improves the color of 3D images without having any noticeable effect on performance. The Mode setting should be set to Application-controlled and Transparency should be turned OFF or to Multisampling (depending on the power of your GPU). 

Background Application Max Frame Rate 

This is a very important, yet often overlooked setting in the Control Panel. This setting will allow you to limit the framerate of your games while you’re switched over to a different application. 

You should keep this setting ON and set it to 20-30 FPS, as this will significantly decrease the power consumption of your PC and reduce fan noise. This will be very beneficial to your PC in the long run.

CUDA – GPUs

This setting is for those people who have multiple GPUs installed on their computers. This setting allows you to choose how many GPUs you want to use for CUDA applications, such as PhysX. If you want to use all of your GPUs, set this setting to All.

If you only have one GPU installed on your computer, you should just leave this setting set to its default value. It will have no effect on your system’s performance.

DSR – Factors and Smoothness

Dynamic Super Resolution (DSR) is a setting that’s catered towards players who purely care about visuals. When you have this setting enabled, it renders the game at a high resolution (of your choice), and then downscales it to the native resolution of your monitor. This results in an incredibly sharp and clear image, but it severely reduces your FPS. 

If you care about performance, you should always keep DSR – Factors OFF. This setting should only be enabled if you have an extremely powerful system, and want to maximize a game’s visual quality. If you choose to enable DSR – Factors, you can use the DSR – Smoothness setting to adjust the smoothness of the downscaled image.

Low Latency Mode

When Low Latency Mode is enabled, it restricts the number of frames that the CPU can prepare before they are given to the GPU for processing. In layman’s terms, this stops the CPU from preparing too many frames in advance, which leads to decreased input lag and faster response times. 

Low Latency Mode should be kept ON, especially if you play competitive games like CS:GO and Valorant where low latency is key. You can even set this setting to Ultra, as it does not have any effect on your framerate. 

Do note that some games come with this setting built into their settings menu. It is named “NVIDIA Reflex” and has two values: ON or ON + Boost. 

If you’re already using the NVIDIA Reflex setting in a game, it will override the Low Latency Mode setting of the Control Panel. Therefore, you don’t need to change this setting for each individual game – you can just set it to ON in the Global Settings tab. 

Max Frame Rate

The Max Frame Rate setting is a tricky one to discuss. This setting allows you to limit the framerate of a program to as many FPS as you want. 

The first thing to note about this setting is that you should never set it in the Global Settings tab. Instead, you should be changing it individually for your games. 

If you’re playing a competitive game where decreased input lag and low frametimes are key (such as CS:GO or Warzone), your game will benefit from having an uncapped (unlimited) framerate. Keeping the FPS uncapped will decrease the frametimes as much as possible, resulting in low input lag. However, this can lead to screen tearing if your FPS stays above your monitor’s refresh rate. 

If you’re bothered by screen tearing, it’s best to keep your FPS limited/capped. And if you’re facing stutters while playing a game where your FPS quickly drops from a very high number to a very low one, and then back up (for example, from 120 to 60, then back to 120), limiting your framerate could fix your issue.

It will fix it by preventing your FPS from going up too high, so when you experience the stutters, they will not feel as jarring. 

Furthermore, if you’re playing a slow-paced game where input lag and frametimes aren’t an issue, it’s a good idea to cap your framerate. This will reduce GPU usage and prevent overheating, and can also decrease screen tearing and other visual artifacts that occur when your GPU usage is very high. However, this will increase frametimes, so your gameplay may feel slightly sluggish. 

The number you should set the Max Frame Rate to mostly depends on your specific situation. But generally, it’s best to set it to the refresh rate of your monitor. You should experiment with different Max Frame Rate settings for each game and find the sweet spot that balances performance, visual quality, and response times.

Multi-Frame Sampled AA (MFAA)

The Multi-Frame Sampled AA (MFAA) setting is essentially an advanced version of the anti-aliasing setting. When enabled, it takes multiple samples of each pixel in an image and then combines them to significantly decrease jagged edges in the final result.

This setting should generally be turned OFF, as it is not as optimized as the built-in anti-aliasing setting of most games. Therefore, it can potentially decrease your FPS quite a bit. 

Monitor Technology

The Monitor Technology setting is only visible to those users who have monitors with variable refresh rates. If you see this setting, you’ll notice that it has three options: G-SYNC, ULMB, and Fixed Refresh Rate. 

If you mostly play competitive games where latency matters, then you should choose Fixed Refresh Rate. However, if you like playing slow-paced games where you aren’t worried about latency, you should select G-SYNC. 

G-SYNC matches your monitor’s refresh rate with the frame output of your GPU. This (generally) results in less screen tearing and stuttering, but your FPS will be much lower. 

OpenGL Rendering GPU 

This is another setting for those people who have multiple GPUs installed in the system. It allows you to select a specific GPU to be used by OpenGL applications. If you only have a single GPU, leave this setting to its default value.

Power Management Mode

If you want to squeeze the most performance out of your NVIDIA GPU, you should select the “Prefer maximum performance” option for this setting. However, keep in mind that this can lead to overheating issues with your GPU in the long run and it also results in increased power consumption. 

If you care about your GPU’s lifespan and your system’s power consumption, you should select the “Adaptive” option instead. This will allow your GPU driver to control your GPU’s usage, resulting in lower power consumption and fewer overheating issues. 

Shader Cache Size

This setting allows you to control the maximum amount of disk space used by your GPU driver for saving shader compiles. Your GPU saves these shader compiles so that it doesn’t need to re-compile the shaders the next time they’re needed. This results in fewer stutters and quicker startup time for games.

The “Driver Default” option for this setting generally works best for most users. But if you want to ensure that you’re reserving enough space for the shaders of all of your games, you can set a custom value. Make sure to allocate at least 10 GB for the Shader Cache Size. 

Texture Filtering

There are 4 unique Texture Filtering settings in the Control Panel:

1. Texture Filtering – Anisotropic Sample Optimization.
2. Texture Filtering – Negative LOD Bias.
3. Texture Filtering – Quality.
4. Texture Filtering – Trilinear Optimization. 

When enabled, the Anisotropic Sample Optimization setting improves performance but results in a slightly less sharp image. When disabled, it improves image quality at the cost of a slight decrease in performance. This setting should be turned ON as it gives a noticeable boost in performance without having a significant effect on visuals. 

The Negative LOD (Level of Detail) Bias setting improves the quality of stationary images on your screen. This setting should always be set to “Allow” as it leads to higher performance. 

The Quality setting allows you to adjust the texture filtering of your games to either improve performance or visuals or find a balance of both. This setting depends on your system’s performance. If your system struggles to load textures in graphically-intensive games, choose the “Performance” or “High Performance” option. And if you have a powerful GPU that can handle all kinds of textures, you can choose the “Quality” or “High Quality” option. 

And finally, Trilinear Optimization adjusts the use of bilinear and trilinear filtering in games in real-time, improving performance but slightly decreasing image quality. This setting should always be turned ON as it gives a noticeable increase in FPS, and the loss in image quality is almost negligible.

Threaded Optimization 

Threaded Optimization should always be set to ON or Auto as it allows applications to use the multiple cores in your CPU. If you disable this setting, you’ll immediately notice a decrease in your FPS.

Vertical Sync 

Vertical Sync, aka VSYNC, matches the FPS of the application to your monitor’s refresh rate to reduce screen-tearing and other display issues, just like GSYNC. However, VSYNC is much less optimized than its GSYNC counterpart, as it results in a noticeably high increase in input lag and FPS.

Therefore, VSYNC should always be turned OFF if your monitor supports GYNC. But if it does not, then you can use VSYNC to fix screen tearing issues. But keep in mind that this will noticeably increase input latency and frametimes. 

Triple Buffering 

This setting is contingent on VSYNC. If you choose to enable VSYNC, you can turn this setting on to improve performance. But if you have VSYNC disabled, make sure to disable this setting as well. 

Virtual Reality Pre-Rendered Frames

As the name suggests, this setting is purely designed for Virtual Reality games. It allows you to limit the number of frames the CPU can generate before the GPU processes them. This results in improved performance, but also increases latency. You can experiment with this setting to find the perfect balance between performance and latency. 

Note: After you’ve finished tweaking the settings, remember to click the Apply button at the bottom to save them – otherwise, your settings will not be saved! And if you face any errors when trying to apply the setting, take a look at our guide to solve the issue. 

2. Best Display Settings

The settings in the display tab allow you to tweak the display settings of your monitor. You can adjust its resolution, refresh rate, color settings, image orientation, and also set up multiple monitors. 

Note: If you do not see the Display tab, there could be an issue with your GPU drivers or BIOS settings. Check out our guide to solve the issue. 

Resolution, Refresh Rate, and Color `

In the “Change resolution” menu, make sure that it is set to your monitor’s native resolution. The list will show you what your monitor’s native resolution is. 

For the Refresh Rate, make sure that the highest value is selected. The higher the refresh rate of your monitor, the more times it will refresh the image on the screen per second. This will result in a smoother and more fluid output. But keep in mind that the benefit of a high refresh rate may be limited by the capabilities of your graphics card.

If you have a 60 Hz monitor, you can generally overclock it to 75 Hz in the Control Panel. But if you don’t see any option for 75 Hz in the menu, you can follow this guide to overclock your monitor through other methods.

While still in the “Change resolution” menu, scroll down to the color settings and select “Use NVIDIA color settings” and ensure that the following options are selected:

1. Desktop color depth: Highest (32-bit)
2. Output color depth: 8 bpc
3. Output color format: RGB
4. Output dynamic range: Full

After that, you can move on to the “Adjust desktop color settings” menu. This menu will allow you to further tweak the color settings of your monitor. You can adjust its brightness, contrast gamma, digital vibrance, and hue to your liking. This is all completely up to your personal preference. 

Desktop Size and Position

In the “Adjust desktop size and position” menu, navigate to the Scaling tab. If you want to use the famous 4:3 aspect ratio, also known as “Stretched” in games like CS:GO and Valorant, ensure that “Full-screen” is selected as the Scaling Mode.

But if you do not play games at a stretched resolution, and want as little input latency as possible, change this option to “No Scaling”. This will give you a slight improvement in performance. 

After that, set the “Perform Scaling on” option to GPU. The GPU Scaling option will instruct your GPU to perform the scaling instead of your monitor, which will result in more precise and accurate scaling, and may even increase your FPS.  

Set up Multiple Displays

If you have more than 1 monitor, this menu will allow you to configure their layout. Firstly, you can select which monitor to use as your main one. Ensure that your using the monitor with the higher resolution and refresh rate as your main.

After that, you can drag the icons of your monitors around to set their layout. Set the layout according to your preference. 

3. Best Video Settings

Finally, in the Video tab, you can tweak the video color and image settings of your monitor(s). But to do so, you’ll have to first select the “Use the NVIDIA setting” option. 

Once you’ve done that, you can adjust the brightness, contrast, hue, saturation, gamma, and dynamic range of the videos displayed on your screen, and can even perform edge enhancement (to increase sharpness) and noise reduction. 

The post Best NVIDIA Control Panel Settings: High FPS & Low Latency! appeared first on Appuals.

This mainly occurs for laptop users as they have mobile GPU chipset(s), these GPU(s) have their own driver mostly provided by manufacturer on the product page. However, Windows treat these mobile GPU(s) as normal desktop GPU(s) sometimes and installs an incorrect, incompatible or outdated version of GPU driver.

This can be easily fixed by disallowing Windows to install the drivers through Windows Update Settings. In this guide, we will go through several tips and methods you can use to avoid such situations.

1. Use the Microsoft Show or Hide Updates to avoid GPU driver update

Microsoft Show or Hide Updates is a utility that allows users to view or hide problematic Windows updates, including driver updates. By using this utility, you will be able to prevent Windows from keep installing the wrong or outdated GPU driver.

First, you need to uninstall the GPU driver from the device manager, and then you will be able to hide the driver update that keeps installing on your Windows. To do this, follow the steps.

1. Open the Device Manager by typing it from Start Menu.

   

2. Once the device manager is opened, expand the Display Adapters.
3. Right-click the GPU driver and select Uninstall.

   

4. Tick Attempt to remove the driver for this device and click Uninstall.

   

5. Wait for the driver to uninstall successfully, then Download the Microsoft Show or Hide Updates Troubleshooter.
6. Once the downloading is finished, simply open it by double-clicking on it.
7. Click Next and wait for it to detect the upcoming updates that will be installed via the Windows Update utility.

   

8. Select Hide Updates from the options and tick the Driver Update to let Windows avoid the driver update.
9. Once done, click Next and just wait for the loading to complete.

   

10. Then, close the troubleshooter and go to the AMD website.
11. Select your GPU and OS to download the latest driver.

    

12. Once done, install the driver using on-screen instructions.
13. Finally, restart your computer, and your problem will be fixed.

2. Change Device Installation Settings

Device Installation settings allow users to install the device drivers automatically by using the Windows Update utility. For instance, when you plug the device into your computer, the driver installs automatically without doing anything.

When Windows thinks that the current GPU driver is outdated, it installs and overwrites the wrong or old driver. This can happen when the Windows server does not have the latest driver for your device.

As a result, when you install an updated driver, it thinks that you have an outdated driver. To increase the GPU performance, it overwrites the latest GPU driver with the outdated or wrong one, which results in degraded GPU performance and loss of Frames Per Second (FPS).

To prevent this, you can change the device installation settings, which won’t install any device driver unless you revert the device installation settings.

1. Hit the Windows + S key, and in the search box, type, View advanced system settings and hit Enter.
   

   

2. Go to the Hardware tab and then click on the Device Installation Settings tab.

   

3. Select ‘No‘ next to the (Your Device Might Not Work as Expected) option
4. To save the modifications, click Save changes.

   

5. Now restart your computer and check if the issue is resolved or not.

3. Disable Windows Update from the registry editor

Registry Editor is like a database on Windows. It has access to every component on Windows released so far, such as Windows Update and Windows Defender. You can customize your Windows to reduce memory usage by disabling many features using the registry editor. In this method, we will disable Windows Update, which will prevent the driver update from keep installing on your PC.

There are two methods to disable automatic Windows updates from the registry editor, Manually and Automatically. If you don’t want to mess around with commands, you can just download the batch file from the link and run it as administrator. However, if you don’t trust the script, you can manually do this by following the steps.

1. Press the Windows key and type Registry Editor.

   

2. Open the registry editor and go to the following directory.

   HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU

3. Double-click the NoAutoUpdate entry from the right pane and change its value data to 1, which will dsiable the automatic Windows update. If you cannot find it, right-click the empty space, and hover New, select DWORD (32-bit) Value to create an entry.

   

4. Name it as NoAutoUpdate and change its value data to 1.

   

5. Once done, double-click the AUOptions and change its value data to 1.
6. If you cannot find AUOptions, create it by following step 3 and name it AUOptions and change its value to data to 1.

   

7. Once done, close the registry editor.
8. Open the task manager and restart Windows Explorer for the registry changes to take effect.

   

4. Disable Windows Update from Group Policy Editor

Group Policy Editor is an administrator tool that is used to configure various Windows and network settings. You can use this tool to prevent the driver updates from including in the Windows update utility.

To disable Windows update from Group Policy Editor, follow the steps:

1. Press the Windows + R keys together to open the Run Window.
2. Enter gpedit.msc in the input box and click OK to open the Group Policy Editor.

   

3. Navigate to the following destination.

   Computer Configuration/Administrative Templates/Windows Components/Windows Update/Manage updates offered from Windows Update

   

4. Double-click Do not include drivers with Windows Updates and select Disabled from the left pane.
   

   

5. Click Apply and click OK. Once done, check if Windows is still installing old AMD drivers.

5. Disable the Windows Update service

Windows Update service is responsible for delivering, detecting, and installing upcoming updates. You can disable the service to prevent the Windows update from keep installing the wrong AMD drivers.

To disable the Windows update service:

1. Press the Windows key and type services.msc in the search box.
2. Click OK to open the services Window.

   

3. Find the Windows update service and right-click on it to open its properties.

   

4. First, stop the service by clicking the Stop button.
5. Change the startup type from Automatic to Disabled.

   

6. Then, click Apply and click OK. This will disable your Windows update utility. In the future, if you want to update your Windows, just come back here and change the startup type to Automatic, then try updating your Windows.

6. Revert Your GPU driver using Device Manager

If the problem still persists, you can try reverting the AMD driver to the latest one. In some cases, Windows updates the driver after 2-3 days. Therefore, you can try reverting the GPU driver to the latest by using the device manager.

1. To do so, press the Windows key and search for Device Manager.
   

   

2. Open the device manager and expand the Display Adapters.
3. Right-click the graphics driver and select Properties.

   

4. Go to Driver from the top and click the Roll Back Driver option.

   

5. Select any reason and click Yes to roll back the driver.

Next time if Windows installs an outdated or wrong AMD driver, just revert the GPU driver by following these steps. 

The post Fix: Windows Repeatedly Installing Incorrect AMD Drivers appeared first on Appuals.

To allow Shadowplay to record your screen, you must have the Desktop Capture option enabled, which can be found in the Privacy Control section in GeForce Experience. Furthermore, you also need to be using the latest version of your Graphics Card drivers, as older drivers can be incompatible with Shadowplay.

After performing a deep investigation into this issue, we’ve found many more effective and easy-to-perform solutions for the error. Below, we’ve listed down the 11 best fixes to help you resolve this problem.

1. Check the System Requirements of NVIDIA Shadowplay

The Shadowplay feature of GeForce Experience is not supported by all CPUs and GPUs. NVIDIA has given a list of hardware that is supported by Shadowplay on their website. So the CPUs and GPUs that are not on the list are incompatible with the feature.

If you want to use this recording service, your system’s hardware must meet the system requirements, which we’ve shown below.

If your hardware is not listed in the table above, you will need to upgrade your system to be able to use Shadowplay.

2. Enable the NVIDIA In-Game Overlay and Allow Desktop Capture

The first solution to this issue is to ensure that you have enabled the GeForce Experience In-Game Overlay and allowed Desktop Capture on your system. If you already have these features enabled, skip to the next solution.

The In-Game Overlay is part of the NVIDIA GeForce Experience program. This overlay is needed to be able to access the Shadowplay features. If you have it disabled, you will not be able to record your gameplay.

After enabling the overlay, it’s crucial to also enable the Desktop Capture within it. If this option is disabled, Shadowplay will be blocked from recording your desktop.

To enable the GeForce Experience In-Game Overlay, follow the steps we’ve listed below:

1. Press the Windows Key, type GeForce Experience, and press enter.

   

2. Click on the gear icon at the top-left corner of the program Window.

   

3. Enable the In-Game Overlay setting.

   

4. Close GeForce Experience.

Now that the overlay is enabled, the next step is to allow Desktop Capture on your system. Follow the steps written below to do so:

1. Open the overlay by pressing Alt + Z at the same time.
2. Click on the gear icon at the right corner of the overlay.

   

3. Scroll down in the list of settings and click on “Privacy Control.”
   

   

4. Allow Desktop Capture.
   

   

Now that you have both of these settings enabled, try using the “Instant Replay” or “Record” option in the overlay. If it still fails to record your gameplay, continue with the next solution below.

3. Reactivate the GeForce Experience In-Game Overlay

Simply disabling and then re-enabling the GeForce Experience In-Game Overlay feature can fix this issue as doing this reinitializes the components and services required to run Shadowplay such as Nvidia Container. So before you try any complex solutions, you should try reactivating your in-game overlay as it may be a quick and easy fix to the problem.

Follow the steps below to reactivate the In-Game Overlay:

1. Open the GeForceExperience app.
2. Open Settings by clicking on the gear icon at the top-left corner.

   

3. Disable the In-Game Overlay.

   

4. Re-enable it.
5. Close GeForce Experience.

After reactivating the In-Game Overlay, try recording a clip using Shadowplay. If the feature continues to not work, don’t worry as we’ve listed more fixes below.

4. Disable the Broadcast Feature

The Broadcast feature present in the In-Game Overlay menu can sometimes conflict with the Instant Replay/Record feature and prevent it from functioning properly. 

So another quick fix to this problem is to disable the Broadcast feature from the menu. Follow the steps below to do so:

1. Open the overlay by pressing Alt + Z at the same time.
2. Click on the gear icon at the right corner of the overlay.

   

3. Scroll down in the list of settings and click on the “Broadcast LIVE” option.

   

4. Disable the Broadcast feature.

   

5. Update GeForce Experience to the Latest Version

If you are not using the latest version of GeForce Experience, it might be the leading cause of the problem you’re facing. Outdated versions of GeForce Experience can have compatibility issues with newer hardware, so they can prevent Shadowplay from recording gameplay on a system.

GeForce Experience usually updates itself automatically, but if the app is not used for an extended period of time, the automatic update may not happen.

So to ensure that your GeForce Experience is updated to the latest version, all you need to do is launch the app and keep it open for a while. Within a few minutes (if you are connected to the internet), the app will automatically detect that it is not updated to the latest version.

It will then trigger an update, which will be completed in 2-3 minutes. If you try this method and no update is triggered, it means that the app is already updated to the latest version.

6. Update GPU Drivers

If the drivers of your NVIDIA Graphics Card are not updated to the latest version, they are most likely the main cause of the recording error you’re facing. To record your gameplay, you must keep your GPU drivers updated to the newest version. 

To check whether you are using the latest drivers for your GPU, open the GeForce Experience app and navigate to the Drivers section. If there are new drivers available to download, it means that you are using outdated drivers.

And if you do not see any new drivers available in this menu, it means that you’re already using the latest drivers for your GPU. In this case, you should skip to the next solution.

Before you download the new drivers, it’s a good idea to wipe (delete) the current drivers from your system. This will ensure that the current drivers do not conflict in any way with the new ones that you’re about to install, as this can cause further unwanted issues.

6.1 Uninstalling Current Drivers

To uninstall the GPU drivers currently installed in the system, it’s best to use a program called Display Driver Uninstaller (DDU). DDU is far superior to the native Windows driver uninstaller because it ensures that not a single trace of the driver remains in the system after the uninstallation process.

To download DDU on your system, visit their official website and press the download button at the very bottom of the page. After DDU is downloaded, you must boot your PC into Safe Mode before you use it to delete the drivers. This will help further ensure that the drivers are uninstalled as safely as possible.

Follow these steps to boot Windows into Safe Mode:

1. Open the Start menu by pressing the Windows key.
2. Right-click on the Power icon, hold the Shift key on your keyboard, and click on Restart.
3. Click on Advanced Options in the Troubleshoot screen.

   

4. Click on Startup Settings in the Advanced Options screen.

   

5. Press the Restart Button.

   

6. Wait for your PC to restart.
7. Press F4 to boot Windows into Safe Mode.

   

After your PC restarts, open DDU and set the device type to GPU and the brand name to NVIDIA. After that, click on the “Clean and Restart” button at the top to start uninstalling the drivers. After a couple of minutes, the drivers will be wiped from the system.

6.2 Installing New Drivers

To install the new drivers, simply open the GeForce Experience app and navigate to the Drivers section again. From there, you’ll be able to download and install the latest drivers for your Graphics Card. After your drivers are updated, you should be able to start recording your gameplay. 

7. Check your Disk Space

If the disk where your Shadowplay is configured to save recordings is low or completely out of space, it will be unable to save any of your replays. You need to have a plentiful amount of free space in your designated disk for your replays to be saved without any issues.

Therefore, the next solution to this problem is to check whether your designated disk for Shadowplay has enough available space.

If you’re unsure where your Shadowplay recordings are being saved, follow the steps below to figure this out:

1. Open the GeForce Experience Overlay by pressing Alt + Z at the same time.
2. Open Settings by clicking on the gear icon at the right corner of the overlay.

   

3. Click on the “Recordings” tab.

   

4. Copy the location under “Video.”
   

   

5. Open File Explorer, paste this address into the address bar, and press enter.

This will open the folder where your recordings are saved. Now, simply check the amount of available space in the disk where this folder is saved.

If the disk is running out of space, right-click on the disk, select “Properties”, then click on Disk Cleanup. This tool will scan your disk for junk files and folders, and allow you to easily delete them. But before you delete all the files/folders, remember to check through the list to ensure that you aren’t deleting anything important.

After you’ve freed up enough disk space, try using Instant Replay and check whether it saves the recording. If your recordings are still not being saved, move on to the next solution below.

8. Restart the NVIDIA Streamer Service

The NVIDIA Streamer Service is a crucial component of GeForce Experience. It allows the program to be able to capture screenshots, record footage, and stream on Twitch, YouTube, and other platforms.

So if you want to record or stream your gameplay using GeForce Experience, you have to ensure that the NVIDIA Streamer Service is enabled and running. If the service is disabled, Shadowplay will not work on your system.

To ensure that the service is always running on your computer, you will have to set its Startup TypetoAutomatic in the Windows Services menu. Follow the steps below to do so:

1. Open the Run dialog box by pressing Windows Key + R at the same time.
2. Type services.msc in the search bar and press enter.

   

3. Look for NVIDIA Streamer Service in the list of services. 
4. Right-click on the service again and select Properties.
5. Set the Startup Type to Automatic.
   

   

6. Click on Apply and press OK.

If the service was already set to start automatically, you can try restarting the service as it can sometimes malfunction. To restart the service, simply right-click on it again in the list of services and select the “Restart” option. 

9. Close Background Programs and Other Overlays

Another simple fix to this solution is to simply close all unnecessary background programs and other overlays while trying to record your gameplay. 

You may have a browser open in the background that has copyrighted content playing, such as a Netflix or Amazon Prime movie. If this is the case, then Shadowplay will not record your gameplay, as it has been configured by NVIDIA to not capture the user’s screen if they have this kind of copyrighted content playing. 

Therefore, close all browsers and other unnecessary programs and then try using Instant Replay or the Record option. 

If that doesn’t resolve the problem, check whether you have any other overlays enabled on your system. The overlays of other programs like Discord, Steam, and Xbox Game Bar could conflict with the GeForce Experience In-Game Overlay, and cause its features to not work properly.

To disable the Discord Overlay, follow these steps:

1. Open the Discord app and click on the gear icon in the bottom-left corner of the Window (next to your username).

   

2. Scroll down to the Activity Settings section and disable the in-game overlay feature.

   

To disable the Steam Overlay, follow these steps:

1. Open the Steam app and click on the small Steam button in the top-left corner of the Window. 

   

2. Select the “Settings” option.
3. Navigate to the In-Game tab.
4. Remove the checkmark next to the “Enable the Steam Overlay while in-game” option.

   

To disable the Xbox Game Bar Overlay, follow these steps:

1. Press Windows Key + I at the same time to open Settings.
2. Click on the Gaming option.
   
3. Disable the Xbox Game Bar. 

   

10. Add an Exception for GeForce Experience in your Antivirus Settings

The Antivirus program installed on your system could potentially flag GeForce Experience as a dangerous program and block its features from functioning.

It’s possible that your Antivirus is considering the recording process as suspicious activity and blocking it. To ensure that this doesn’t happen, you must add an exception for GeForce Experience in your Antivirus settings.  

To open your Antivirus program’s settings menu, follow these steps:

1. Open the Start menu by pressing Windows Key.
2. Type Windows Security and press enter.

   

3. Navigate to the Virus & Threat Protection section. 
4. Click the “Open App” button.

   

This will open your Antivirus program’s settings menu where you can add an exception for GeForce Experience. 

If you don’t see an option in the menu to add the exception, the alternative is to simply disable the Antivirus program for a limited period of time. While the Antivirus is disabled, you can check whether the issue with Instant Replay has been resolved. 

If the recording starts working while you’ve disabled your Antivirus, then the Antivirus is the root cause of the problem. In this case, you can try installing another Antivirus on your system that works without causing any issues with Shadowplay. 

If you’re unsure which Antivirus program is the best one for you to install, see our guide where we’ve listed the best Antivirus programs available online. 

11. Reinstall GeForce Experience

If none of the above solutions have resolved the recording issue, then your GeForce Experience app itself is most likely bugged. The app may be outdated but unable to update itself to the latest version, or some sort of corruption could have happened while the app was updating. 

Therefore, the final fix to the problem is to do a fresh install of GeForce Experience. This will ensure that the app is updated to the latest version and is free from any bugs.

Follow the steps written below to reinstall GeForce Experience: 

1. Open the Run dialog box by pressing Windows Key + R at the same time.
2. Type appwiz.cpl in the search bar and press enter.

   

3. Right-click on NVIDIA GeForce Experience in the list of apps and press uninstall.
4. Visit NVIDIA’s official website after it is uninstalled and re-download it from there

The post NVIDIA Shadowplay Not Recording? 11 Quick & Easy Fixes appeared first on Appuals.

Your Windows system will not be able to detect the NVIDIA graphics card if the graphics driver is corrupt or installed incorrectly because Graphic cards rely on these drivers to efficiently provide it’s functionalities. Without the driver, you will not be able to utilize your graphics card’s full potential.

In this guide, we will walk you through the troubleshooting methods to try if this happens on your computer. Proceed with the method that fits your situation the best.

Before You Begin

You will need to know hardware ID of your device to proceed with some of the steps listed below. In case you are not sure which GPU your computer has, here is a quick guide for you to find it:

1. Type Device Manager in the search area of the taskbar and click Open.
2. Locate your device in the Device Manager and right-click on it.
3. Choose Properties from the context menu.

   

4. In the Properties dialog, head over to the Details tab and expand the dropdown for Property and choose Hardware IDs. 

   

Once you have found the hardware ID, look for its compatible driver on the web.

1. Check the Device Manager

The first thing that we recommend doing is checking if the graphics card is listed in the Device Manager. You might notice a yellow exclamation mark on it, which will indicate that the driver is either outdated or corrupt.

Here is how you can check the Device Manager:

1. Type Device Manager in the search area of the taskbar and click Open.
2. Expand the Display Adapters section and check if your driver is listed there.

   

If it is and has any symbols associated with it, proceed with the next method below.

2. Reinstall the Driver

As we mentioned earlier, it is possible that the system cannot detect the graphics card because the driver is corrupt or outdated.

A corrupted driver may have occurred during an update, installation, or as a result of malware, resulting in Windows not being able to detect it. An outdated graphics driver can also cause similar issues. Whenever a new version of Windows is released, the graphics driver may need to be updated to be compatible.

The best way to proceed in this case is by uninstalling the current driver and then downloading and installing the latest version from the manufacturer’s website.

It is important to first uninstall your current driver before installing the new one to prevent any conflicts between the old and the new driver.

Here is all that you need to do:

1. Download the Display Driver Uninstaller and click on the downloaded file to install the tool.
2. Once the tool is installed, run it.
3. Expand the dropdown for Select Graphics Driver and choose NVIDIA.
4. Now, click on Clean and restart (Highly Recommended). This should restart your computer.

   

5. Once the installation process is completed, head over to the NVidia drivers download page.
6. In the Manual driver search section, enter all the required information correctly.

   

7. Click on the Search button to find the appropriate driver for your system.
8. Choose the first driver that appears in the list and download it. It is the most recent driver available for your GPU and operating system.

   

9. Next, run the downloaded file and choose the Perform clean install in the NVidia installation window.
10. Proceed with the on-screen instructions to complete the installation and then restart your computer.

3. Remove the Conflicting Software

Another reason why the system may not be able to recognize the graphics driver can be because of conflicting software. It can occur when another program interferes with the driver, causing it to malfunction.

The easiest way to check if this is the case is by booting the computer in Safe Mode. The Safe Mode feature starts Windows without any drivers or services, which can help identify if a third-party program is causing the problem.

Follow these steps to boot the PC in Safe Mode:

1. Restart the computer and as the computer is restarting, press the F8 key repeatedly.
2. Choose Safe Mode from the list of options available. Alternatively, you can use the System Configuration tool to boot into Safe Mode as well.
3. Check whether the operating system recognizes the graphics driver after starting the computer in Safe Mode.

During Safe Mode, if the graphics driver is recognized and the problem is resolved, it’s likely that conflicting software is the cause of the problem. If this happens, you can try to identify the conflicting software and remove it from the system.

You can either use the system restore utility to revert to an older functioning state or you can manually uninstall the recently installed software.

Here is how you can do the latter:

1. Type control in the text field of Run and click Enter.
2. Click on Uninstall a program under the Programs section.

   

3. Now you should see a list of all the programs installed on your computer. Identify the problematic one and right-click on it.
4. Choose Uninstall and follow the on-screen instructions to proceed with the uninstallation.

   

4. Update Windows

Installing the most recent Windows updates can also help resolve the issue of the graphics driver not being recognized by the computer. Software and device drivers can be updated as part of Windows updates, so if you haven’t installed the latest updates in a while, now might be a good time to do so.

Here is how you can do that:

1. Press the Win + I keys together to open Windows Settings.
2. Choose Windows Updates from the left pane.
3. Move to the right side of the window and click on the Check for updates button.

   

4. The system will now scan for the available updates. Once the scan is complete, click on the Download & install button for each update one by one.

   

5. Finally, restart your computer and check if the issue is resolved.

5. Check the Connection Of Your Graphics Card to Motherboard

It is also important to ensure that the graphics card is securely plugged into the motherboard. Having a graphics card that isn’t properly connected to the motherboard can cause issues with the graphics driver. It is possible that the driver will not properly communicate with the card if the card is not connected properly, leading to the issue at hand.

Here are the general steps to check the connection of the graphics card to the motherboard and ensure it’s securely plugged in:

1. Turn off the computer and unplug it from the power outlet.
2. Remove the screws or thumbscrews from the side or back of the computer case to open the case.
3. You will usually find the graphics card on the back of your motherboard; it plugs into the motherboard through a number of connectors.
4. Ensure the connectors on the motherboard are properly connected to the graphics card and that they are seated securely in the appropriate slots.
5. Push the connectors in until they click into place if they are not securely connected.
6. Ensure the graphics card’s power connectors are securely plugged in and that the connectors are not loose.
7. You can now close the case and plug the computer back in.
8. Restart it and check if the graphics driver is now detected successfully.

The post 5 Solutions If Windows Won’t Detect NVIDIA Graphics Card appeared first on Appuals.